Samsung RR19H1348WWA Manuel D’Utilisation

English - 10

When installing, servicing, or cleaning 

behind the refrigerator, be sure to pull the 

unit straight out and push back in straight 

after finishing. 

Also, make sure your floor supports the full-

load refrigerator. 

Otherwise, it may cause floor damage.

Please tie up the extra length of the power 

cord at the back of the refrigerator so as 

not to be touched on the floor preventing 

the power cord from being crushed by the 

rollers upon relocation.

FLOORING

For proper installation, this refrigerator must be 

placed on a level surface of hard material that has 

the same height as the rest of the flooring. 

This surface should be strong enough to support a 

fully loaded refrigerator. 

To protect the floor finish, cut a large section of the 

cardboard carton and place it under the refrigerator 

where you are working.

Pulling or pushing the refrigerator may 

damage the floor. 

Moving the refrigerator after installation may 

damage the floor.

LEVELLING THE REFRIGERATOR

To avoid a hazard due to 

instability of the refrigerator, 

please place the refrigerator 

on a horizontal support and 

levelled in accordance with 

the following instruction for 

installation.

Failing to do so may result in 

the refrigerator tipping and a 

personal injury.

If the front of the appliance is 

slightly higher than the rear, 

the door can be opened and 

closed more easily.

Case 1) The appliance tilts 

down to the left.

• Turn the left adjusting leg in 

the direction of the arrow 

until the appliance is level.

Case 2) The appliance tilts 

down to the right.

• Turn the right adjusting leg 

in the direction of the arrow 

until the appliance is level.

DA68-03115A-00.indb   10

2014. 8. 4.   �� 5:04