Samsung HM12 SBS s Twin Cooling sistemom, 535 l Manuel D’Utilisation

Page de 216
English - 25
02 OPERA
TING
When you use Power Freeze the energy 
consumption of the refrigerator will increase.
Remember to turn it off when you don’t 
need it and return the freezer to your original 
temperature setting.
If you need to freeze large amount of food stuff, 
activate Power Freeze function at least 20 hours 
before.
Display Off Function
To energy conservation the Panel Display turns off 
automatically under the following conditions:
When no button has been pressed, when no doors 
are open, or when no Dispenser Lever has been 
pushed.
However, the icon indicating your Vacation or Cubed 
/ Crushed / Ice Off, will stay on.
When you press a button, open a door, or push 
Dispenser Lever, the Panel Display will turn on again.
Except for the Ice Type button, all function buttons 
will become operational after you remove your fi nger 
from the button you are currently pressing.
CONTROLLING THE 
TEMPERATURE
CONTROLLING THE FREEZER 
TEMPERATURE
The freezer temperature can be set between -15 °C 
(6 °F) and -23 ºC (-10 °F) to suit your particular 
needs. Press the Freezer button repeatedly until the 
desired temperature is shown in the temperature 
display. Keep in mind that foods like ice cream may 
melt at -16 ºC (4 °F).
The temperature display will move sequentially from 
-15 °C (6 °F) and -23 ºC (-10 °F). When the display 
reaches -23 ºC (-10 °F), it will begin again at -15 ºC 
(6 °F).
Five seconds after the new temperature is set the 
display will again show the actual current freezer 
temperature. However, this number will change as 
the Freezer adjusts to the new temperature.
When you place the SHELF-BOTTOM instead of 
Bottom drawer, the SHELF-BOTTOM is two star 
section (All models). The Bottom door guard in 
the freezer is two star section.
(RSH7, RS77, RS7528, RS7527, RS54H, 
RS57H models).
So, the Temperature in the two star sections are 
slightly higher than other freezer compartment.
CONTROLLING THE FRIDGE 
TEMPERATURE
The refrigerator temperature can be set between 7 ºC 
(46 °F) and 1 ºC (34 °F) to suit your particular
needs. Press the Fridge button repeatedly until the 
desired temperature is shown in the temperature 
display. The temperature control process for the 
Fridge works just like the Freezer process. Press the 
Fridge button to set your desired temperature. After 
a few seconds, the Fridge will begin tracking towards 
the newly set temperature. This will be refl ected in the 
digital display. 
The temperature of the freezer or the refrigerator 
may rise from opening the doors too frequently, 
or if a large amount of warm or hot food is 
placed in either side. This may cause the digital 
display to blink. Once the freezer and refrigerator 
return to their normal set temperatures the 
blinking will stop. If the blinking continues, 
you may need to “reset” the refrigerator. Try 
unplugging the appliance, wait about 10 minutes 
and then plug back in.
DA68-02710M-06.indb   25
DA68-02710M-06.indb   25
2014. 1. 24.   
 10:05
2014. 1. 24.   
 10:05