Samsung RA23PTIH Manuel D’Utilisation
safety information
_3
SEVERE WARNING SIGNS
FOR INSTALLATION
FOR INSTALLATION
• Do not install the refrigerator in a damp
place or place where it may come in contact
place or place where it may come in contact
with water.
- Deteriorated insulation of electrical parts may
- Deteriorated insulation of electrical parts may
cause an electric shock or fire.
• Do not place this refrigerator in direct sunlight or
expose to the heat from stoves, room heaters or
other appliance.
other appliance.
• Do not install this appliance near a heater,
inflammable material.
• Do not install this appliance in a humid, oily or
dusty location, in a location exposed to direct
sunlight and water (rain drops).
sunlight and water (rain drops).
• Do not install this appliance in a location where
gas may leak.
- This may result in electric shock or fire.
• Do not plug several appliances into the same
• Do not plug several appliances into the same
multiple power board.
The refrigerator should always be plugged into
its own individual electrical which has a voltage
rating that matched the rating plate.
The refrigerator should always be plugged into
its own individual electrical which has a voltage
rating that matched the rating plate.
- This provides the best performance and also
prevents overloading house wiring circuits, which
could cause a fire hazard from overheated wires.
could cause a fire hazard from overheated wires.
• Plug the power plug into the wall socket firmly.
Do not use a damaged power plug, damaged
power cord or loose wall socket.
power cord or loose wall socket.
- This may result in electric shock or fire.
• Do not pull or excessively bend the power cord.
• Do not twist or tie the power cord.
- When moving the refrigerator, be careful not to
• Do not pull or excessively bend the power cord.
• Do not twist or tie the power cord.
- When moving the refrigerator, be careful not to
roll over or damage the power cord
- This may result in electric shock or fire.
• This appliance should be positioned in such a
• This appliance should be positioned in such a
way that it is accessible to the power plug.
- Failing to do so may result in electric shock or
fire due to electric leakage.
• Never unplug your refrigerator by pulling on the
power cord.
Always grip plug firmly and pull straight out from
the outlet.
Always grip plug firmly and pull straight out from
the outlet.
- Damage to the cord may cause a short-circuit,
fire and /or electric shock.
• The installation or any service of this appliance
is recommended by a qualified technician or
service company.
service company.
- Failing to do so may result in electric shock,
fire, an explosion, problems with the product, or
injury.
injury.
• This refrigerator must be properly installed
and located in accordance with the manual
and located in accordance with the manual
before it is used.
• Insert the power plug with it’s cord down.
- Otherwise the electric wire can be down and it
• Insert the power plug with it’s cord down.
- Otherwise the electric wire can be down and it
can cause fire and electric shock.
• Make sure that the power plug is not squashed
or damaged by the back of the refrigerator.
• When moving the refrigerator, be careful not to
roll over or damage the power cord.
- This constitutes a fire hazard.
• The appliance must be positioned so that the
• The appliance must be positioned so that the
plug is accessible after installation.
• The refrigerator must be grounded.
- You must ground the refrigerator to prevent
- You must ground the refrigerator to prevent
any power leakages or electric shocks caused by
current leakage from the refrigerator.
• Never use gas pipes, telephone lines or other
current leakage from the refrigerator.
• Never use gas pipes, telephone lines or other
potential lightening rods as ground.
- Improper use of the ground plug can result in
electric shock.
• If the power cord is damaged, have it
replaced immediately by the manufacturer or
replaced immediately by the manufacturer or
its service agent.
cAuTION SIGNS FOR
INSTALLATION
INSTALLATION
• Allow sufficient space to install the
refrigerator on a flat surface.
refrigerator on a flat surface.
- If your refrigerator is not level, the internal cooling
system may not work correctly.
• Keep ventilation opening in the appliance
enclosure or mounting structure clear of
obstruction.
obstruction.
• Allow the appliance to stand for 2 hours after
installation.
• Install your appliance on a level and hard floor
that can support its weight.
- Failing to do so may result in abnormal
vibrations, noise, or problems with the product.
WARNING
cAuTION
DA68-02477A(0.0)-EN (Paolo-T).indd 3
2010.12.17 10:8:22 AM