Samsung RSH7PNRS Manuel D’Utilisation

14_

 

setting up

select the location where the purifi er is to 
install. (Model with the purifi er)

-    If you wish to reassemble the water inlet and outlet 

sides of the purifi er during purifi er installation, see 
the reference illustration.

-    Cut the water line attached to the purifi er to the 

appropriate place after measuring the distance 
between the purifi er and the cold water tap.

Replacement Instructions

1. Shut off water supply.
2. Note the Flow direction on the fi lter.
3.  Insert water supply tube into the inlet side of the 

fi lter until the tube stop.

4.  After inserting tube, put together the clip strongly.       

The Clip fi x the tube.

5.  Turn on the water and check for leaks. If leaks 

occur, repeat step 1,2,3,4. If leaks persist, 
discontinue use and call your supporting dealer.

6. Flush fi lter for 5 minutes before use.

Remove any residual matter inside the 
purifi er. (Model with the purifi er)

-   Open the main water tap to check whether water 

is running through the water tube on the water inlet 
side of the purifi er.

-   If water does not come out through the line, check 

whether the tap is open.

-   Leave the tap open until clean water is running 

out and any residual matter that built up during 
manufacturing has been removed.

Attach the purifi er lock-clip.

-   Hold the purifi er lock-clip in the appropriate position 

(under the sink for example) and fi x it tightly into 
place where to screw.

Secure the purifi er in position.

-   Fix the purifi er in position, as shown in the fi gure on 

the right.

WARRANTY INFORMATION

This water line installation is not covered by the 
refrigerator or ice maker manufacturer’s warranty.
Follow these instructions carefully to minimise the risk of 
expensive water damage.

Note:

If the coupler does not fi t on the current tap, go
the nearest authorised service dealer and purchase the 
right couplers fi ttings.

COUPLER “A”

TAP

COUPLER

SIDE OF

PURIFIER

WATER INLET
SIDE OF PURIFIER

LINE OUTLET

90 degree

PURIFIER WATER

CAUTION

Locking Clip

Locking Clip

Insert  Locking  Clip  After 

Insert Locking Clip After 

tube seated

tube seated

WATER SUPPLY

INLET SIDE

PERMEAT

FLOW DIRECTION

Note :

  

You must also ensure 
that the cut is square 
and not at any sort 
of angle as this could 
cause a leak

WATER LINE

PURIFIER

WATER

OUTLET SIDE

OF PURIFIER

PURIFIER LOCK-CLIP

WATER TUBE

PURIFIER LOCK-CLIP

PURIFIER

DA99-02291Q.indb   Sec4:14

DA99-02291Q.indb   Sec4:14

2012.3.5   3:24:50 PM

2012.3.5   3:24:50 PM