Samsung RL70LBPN Manuel D’Utilisation
04_
safety information
refrigerator.
- If spilled, there is a risk of fire or electric shock.
CAUTION SIGNS FOR
CLEANING
CLEANING
• Do not use a wet or damp cloth when cleaning
the plug, remove any foreign material or dust
from the power plug pins.
from the power plug pins.
- Otherwise there is a risk of fire.
WARNING SIGNS FOR
DISPOSAL
DISPOSAL
• When disposing of this or other refrigerators,
remove the door/door seals, door latch so that
small children or animals cannot become trapped
inside.
small children or animals cannot become trapped
inside.
• Leave the shelves in place so that children may
not easily climb inside.
• R600a or R134a is used as a refrigerant. Check
the compressor label on the rear of the appliance
or the rating label inside the fridge to see which
refrigerant is used for your refrigerator. When
this product contains flammable gas(Refrigerant
R600a) contact your local authority in regard to
safe disposal of this product.
or the rating label inside the fridge to see which
refrigerant is used for your refrigerator. When
this product contains flammable gas(Refrigerant
R600a) contact your local authority in regard to
safe disposal of this product.
• Cyclopentane is used as a insulation blowing gas.
The gases in insulation material require special
disposal procedure. Please contact your local
authorities in regard to the environmentally safe
disposal of this product. Ensure that none of the
pipes on the back of the appliances are damaged
prior to disposal. The pipes shall be broke in the
open space.
disposal procedure. Please contact your local
authorities in regard to the environmentally safe
disposal of this product. Ensure that none of the
pipes on the back of the appliances are damaged
prior to disposal. The pipes shall be broke in the
open space.
In the event of a power failure, call the local
office of your Electricity Company and ask
how long it is going to last.
office of your Electricity Company and ask
how long it is going to last.
Most power failures that are corrected in an hour or
two will not affect your refrigerator temperatures.
However, you should minimize the number of door
openings while the power is off.
But should the power failure last more than 24hours,
remove all frozen food.
For doors or lids fitted with locks and keys, the keys
be kept out of the reach of children and not in the
vicinity of the refrigerating appliance, in order to
prevent children from being locked inside.
two will not affect your refrigerator temperatures.
However, you should minimize the number of door
openings while the power is off.
But should the power failure last more than 24hours,
remove all frozen food.
For doors or lids fitted with locks and keys, the keys
be kept out of the reach of children and not in the
vicinity of the refrigerating appliance, in order to
prevent children from being locked inside.
ADDITIONAL TIPS FOR PROPER
USAGE
USAGE
• Allow the appliance to stand for 2 hours
after installation.
• To get best performance of product,
- Do not place foods too closely in front of
the vents at the rear of the appliance as it
can obstruct free air circulation in the freezer
compartment.
can obstruct free air circulation in the freezer
compartment.
- Wrap the food up properly or place it in airtight
containers before put it into the fridge freezer
- Do not put any newly introduced food for freezing
near to already frozen food.
• There is no need to disconnect the refrigerator
from the power supply if you will be away for
less than three weeks. But, remove all the food if
you are going away for the three weeks or more.
Unplug the refrigerator and clean it, rinse and dry.
less than three weeks. But, remove all the food if
you are going away for the three weeks or more.
Unplug the refrigerator and clean it, rinse and dry.
• The appliance might not operate consistently
(possibility of defrosting of contents or
temperature becoming too warm in the frozen
food compartment) when sited for an extended
period of time below the cold end of the range of
temperatures for which the refrigerating appliance
is designed.
temperature becoming too warm in the frozen
food compartment) when sited for an extended
period of time below the cold end of the range of
temperatures for which the refrigerating appliance
is designed.
• Do not store food which goes bad easily at low
temperature, such as bananas, melons.
• Place the ice tray at the originally provided
posistion by manufacturer in order to achieve
optimal ice-freezing.
optimal ice-freezing.
• Your appliance is frost free, which means there is
no need to manually defrost your appliance, as
this will be carried out automatically.
this will be carried out automatically.
• Temperature rising during the defrost can comply
with ISO requirement. But If you want to prevent
an undue rise in the temperature of the frozen
food while defrosting the appliance, please wrap
the frozen food in several layers of paper such as
newspaper.
an undue rise in the temperature of the frozen
food while defrosting the appliance, please wrap
the frozen food in several layers of paper such as
newspaper.
• Any increase in temperature of frozen food during
defrosting can shorten its storage life.
• Contains fluorinated greenhouse gases covered
by the Kyoto Protocol.
• Foam blown with fluorinated greenhouse gases.
CAUTION
DA68-01817M-EN.indd 4
2011.1.11 5:14:3 PM
•
Do not apply strong shock or excessive force onto
the surface of glass.
- Broken glass may result in a personal injury and/or
property damage.
the surface of glass.
- Broken glass may result in a personal injury and/or
property damage.
•
There is protective film on the surface of some
refrigerator models, which is used to protect the
refrigerator from scratches during transport. To
avoid static electricity, please peel off the
protective film slowly. If the protective film is not
removed for a long time, it may cause color
shading of the steel plate.
refrigerator models, which is used to protect the
refrigerator from scratches during transport. To
avoid static electricity, please peel off the
protective film slowly. If the protective film is not
removed for a long time, it may cause color
shading of the steel plate.