Samsung SL-C4060FX Manuel D’Utilisation
Wireless network setup (Optional) |
150
IP setting using SetIP Program (Windows)
This program is used to manually set the network IP address of your machine using its MAC
address to communicate with the machine. The MAC address is the hardware serial number of
the network interface and can be found in the
address to communicate with the machine. The MAC address is the hardware serial number of
the network interface and can be found in the
Network Configuration Report (see "Printing a
Configuring the machine’s wireless network
Before starting, you will need to know the network name (SSID) of your wireless network and the
network key if it is encrypted. This information was set when the access point (or wireless router)
was installed. If you do not know about your wireless environment, please ask the person who set
up your network.
network key if it is encrypted. This information was set when the access point (or wireless router)
was installed. If you do not know about your wireless environment, please ask the person who set
up your network.
To configure wireless parameters, you can use
SyncThru™ Web Service.
Using SyncThru™ Web Service
Before starting wireless parameter configuration, check the cable connection status.
1
Access the
SyncThru™ Web Service (see "Logging into SyncThru™ Web Service" on page
197).
2
Select
Network Settings tab.
3
Select
Wi-Fi > Wizard.
4
Select the one
Network Name(SSID) in the list.
5
Select
Next.
If the wireless security setting window appears, enter the registered password (network
password) and select
password) and select
Next.
6
The confirmation window appears, please check your wireless setup. If the setup is right,
click
click
Apply.
Turning the Wi-Fi network on/off
1
Access the
SyncThru™ Web Service (see "Logging into SyncThru™ Web Service" on page
197).
2
Select
Network Settings tab > Wi-Fi.
3
You can turn the Wi-Fi network on/off.