Samsung SL-C4060FX Manuel D’Utilisation
SyncThru™ Web Service |
196
SyncThru™ Web Service
This chapter gives you step-by-step instructions for setting up the network environment through
SyncThru™ Web Service.
SyncThru™ Web Service.
Some menus may not appear on the display screen depending on the settings or models.
If so, it is not applicable to your machine.
If so, it is not applicable to your machine.
What is SyncThru™Web Service?
If you have connected your machine to a network and set up TCP/IP network parameters
correctly, you can manage the machine via SyncThru™ Web Service. Use SyncThru™ Web Service
to:
correctly, you can manage the machine via SyncThru™ Web Service. Use SyncThru™ Web Service
to:
• View the machine’s device information and check its current status.
• Change TCP/IP parameters and set up other network parameters.
• Change the printer preference.
• Set the email notifications advising of the machine’s status.
• Get support for using the machine.
• Upgrade machine software.
Required web browser
You need one of the following web browsers to use SyncThru™ Web Service.
• Internet Explorer® 8.0 or higher
• Chrome 27.0.1453 (stable release at 2013-05-21) or higher
• FireFox 21.0 (stable release at 2013-05-14 ) or higher
• Safari 5.1.9 (Mac OS X 10.6 support) or higher
Connecting to SyncThru™ Web Service
IPv4 supported web browser
1
Start a web browser, such as Internet Explorer®, that supports IPv4 addressing as a URL.
Enter the machine’s IP address (http://xxx.xxx.xxx.xxx) in the address field and press the
Enter key or click
Enter key or click
Go.
You can get the machine’s IP address from the machine (see"Report" on page 188).
2
Your machine’s SyncThru™ Web Service website opens.