Samsung T24B301LB Manuel D’Utilisation
6
English
Getting Started
!
Bend the outdoor antenna cable
downwards at the location where it
comes in the house so that rainwater
does not fl ow in.
downwards at the location where it
comes in the house so that rainwater
does not fl ow in.
y
If rainwater enters the product, it
may result in electric shock or fi re.
may result in electric shock or fi re.
!
Install the antenna far away from any
high voltage cables.
high voltage cables.
y
If the antenna touches or falls onto
a high voltage cable, it may result in
electric shock or fi re.
a high voltage cable, it may result in
electric shock or fi re.
Caution
!
Do not let the product drop while
moving it.
moving it.
y
This may result in a problem with
the product or injury.
the product or injury.
Do not place the product face down on
the fl oor.
the fl oor.
y
This may damage the panel of the
product.
product.
When installing the product on a
console or shelf, make sure that the
front of the product does not protrude
out of the console or shelf.
console or shelf, make sure that the
front of the product does not protrude
out of the console or shelf.
y
Otherwise, this may cause the
product to fall off and result in a
malfunction or injury.
product to fall off and result in a
malfunction or injury.
y
Make sure to use a cabinet or
shelf suitable to the size of the
product.
shelf suitable to the size of the
product.
!
When putting the product down, handle
it gently.
it gently.
y
Otherwise, it may result in a
problem with the product or injury.
problem with the product or injury.
SAMSUNG
!
If the product is installed in a location
where the operating conditions vary
considerably, a serious quality problem
may occur due to the surrounding
environment. In this case, install the
product only after consulting one of our
service engineers about the matter.
where the operating conditions vary
considerably, a serious quality problem
may occur due to the surrounding
environment. In this case, install the
product only after consulting one of our
service engineers about the matter.
y
Places exposed to microscopic
dust, chemicals, too high or
low temperature, high humidity,
airports or stations where the
product is continuously used.
dust, chemicals, too high or
low temperature, high humidity,
airports or stations where the
product is continuously used.