Samsung LED Monitor Manuel D’Utilisation

Getting Started

English

Plug & Play (Initial Setup)

When you turn the TV on for the first time, a sequence of on-screen prompts will assist in configuring basic settings. To turn on
the TV, press the

POWER

P button.

✎

Plug & Play is available only when the Source List is set to TV.

✎

Before turning on the TV, make sure you have connected the TV to an antenna or cable connection (p. 14).

Selecting a language

Press the u or d button, then press the

ENTER

E button. Select

the desired OSD (On Screen Display) language.

Selecting Store Demo
or Home Use

Press the l or r button, then press the

ENTER

E button.

Select the Home Use mode. Store Demo Mode is for retail
environments.

To return the unit’s settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you see the
volume OSD, press and hold

for 5 sec.

Selecting search
options for auto tuning

Press the u or d button, then press the

ENTER

E button. Select Air, Cable or Auto.

✎

If you selected Cable, you’ll go to the cable system screen. Use the u or d button

to select the correct cable signal format - STD, HRC, or IRC - and then press

ENTER

E. Most cable systems use STD. Select the correct cable signal format for

both the Digital and Analog systems.

✎

When done, select Start, and the press

ENTER

Setting the Clock
Mode

Set the Clock Mode automatically or manually.

Auto: Allows you to select DST (Daylight Saving Time) mode and time zone.

Manual: Allows you to manually set the current date and time (p.26).

View the HDTV
Connection Guide

The connection method for the best HD screen quality is displayed.

Enjoy your TV.

Press the

ENTER

E button.

If You Want to Rerun Plug & Play...

m → Setup → Plug & Play →

ENTER

✎

NOTE
To change the TV’s setting from Store Demo to Home Use when not in Plug & Play, press the volume button on the TV.
When you see the volume in the OSD, press and hold

for 5 sec.