Samsung External Dispenser French Door With Showcase Door Manuel D’Utilisation

English - 17

SETTING

 UP

MAKING MINOR ADJUSTMENTS 
BETWEEN OUT DOOR AND IN 
DOOR

After raising the out door, insert the supplied SHIM 
HINGE MIDDLE in the gap between the OUT 
DOOR and the HINGE-SHAFT.

SHIM HINGE MIDDLE are enclosed with 
the refrigerator. 
The thickness of RING is 0.04” (1 mm).

Keep the Rings out of the reach of children and 
make sure that children do not play with them or 
put them into their mouths.

INSTALLING THE WATER 
DISPENSER LINE

A water dispenser with a filter is one of the helpful 
features on your new refrigerator. 
To help promote better health, the water filter 
removes unwanted particles from your water. 
However, it does not sterilize the water or destroy 
microorganisms. You may need to purchase a 
water purifying system to do that. 
The water line also connects to the ice maker. 
For the ice maker to operate properly, water 
pressure of 20 ~ 125 psi (138 ~ 862 kPa) is 
required. 
If the refrigerator is installed in an area with low 
water pressure (below 20 psi), you can install a 
booster pump to compensate for the low pressure. 
After you have connected the water line, make 
sure the water storage tank inside the refrigerator 
is properly filled. 

To do this, press the water dispenser lever until the 
water runs from the water outlet.

Water line installation kits are available at 
extra cost from your dealer. 
We recommend using a water line 
installation kit that contains copper tubing 
and a ¼” compression nut.

Connecting to the water supply line

1.  First, shut off the main water 

supply.

2.  Locate the nearest cold water drinking line and 

install the pipe clamp and shut off valve.

3.  Connect the water line installation kit to the 

shut off valve.

Shut off valve

Pipe clamp

Cold water line

Water line installation kit

DA68-02954B-05.indb   17

2015. 11. 5.   �� 5:15