Samsung NE58K9500SG - Cuisinière électrique de 5,8 pi³ avec design encastrable Guide De Montage

Installing a 3-wire conduit

• Aluminum building wire may be used but it must be rated for the correct

amperage and voltage. Connect the wires as described below.

• The wire you use, the location and enclosure of splices, etc., must conform to

good wiring practices and local codes.

1. Loosen the 3 lower terminal screws from

the terminal block.

2. Insert the center bare wire (white/neutral)

tip through the bottom center terminal

block opening. On certain models, the

wire will need to be inserted through the

ground strap opening and then into the

bottom center block opening.

3. Insert the two side bare wire tips into the

lower left and the lower right terminal

block openings.

4. Tighten the screws until the wire is firmly

secured (35 to 50 inch-lbs.). Do not over-

tighten the screws since it could damage

the wires.

5. Go to Step 5 on page 15 to continue

with the installation.

White

Black

Red

Ground

strap

Neutral

terminal

Wire tips

Red

White

Black

English - 13

CONNEC

TING THE POWER