Samsung DVE50M7450P/AC Manuel D’Utilisation
Troubleshooting
Troubleshooting
English
40
Problem
Action
Items still wrinkled
after WRINKLE
PREVENT
(WRINKLE-CARE,
WRINKLE RELEASE).
after WRINKLE
PREVENT
(WRINKLE-CARE,
WRINKLE RELEASE).
• Small loads of 1 to 4 items work best.
• Load fewer items. Load similar-type items.
• Take out the items immediately after drying is complete.
• Load fewer items. Load similar-type items.
• Take out the items immediately after drying is complete.
Water drips from the
nozzle when STEAM
CARE starts.
nozzle when STEAM
CARE starts.
• This is steam condensation. The dripping water will stop after
a short time.
Sprayed water is not
visible during STEAM
CARE.
visible during STEAM
CARE.
• Sprayed water is difficult to see when the door is closed.
Extended time.
• Sensor Dry automatically senses the moisture in the load
and shuts the dryer off when the selected dryness level is
reached.
The drying time can change according to the type and
amount of laundry. See the cycle chart for reference.
reached.
The drying time can change according to the type and
amount of laundry. See the cycle chart for reference.
If a problem persists, contact a local Samsung service center.
DV7450M-03170Z-00_EN.indd 40
2017-01-25 11:24:24