Samsung RF23HCEDBBC Manuel D’Utilisation

Page de 140
English - 12
CAUTION
When moving your refrigerator 
To prevent floor damage, be sure the front 
adjusting legs are in the up position (above the 
floor). 
Refer to ‘Leveling the Refrigerator’ on page 16.
Flat-blade screw 
driver (-)
Control Lever
Flooring
For proper installation, you must place this 
refrigerator on a level, hard surface that is the 
same height as the rest of the floor. 
This surface should be strong enough to support a 
fully loaded refrigerator. 
To protect the finish of the flooring, cut a large 
section of the cardboard carton and place it under 
the refrigerator where you are working. 
When moving the refrigerator, you need to pull and 
push it straight forwards or back. 
Do not wiggle it from side to side.
REMOVING THE REFRIGERATOR 
DOORS
For some installations, you need to remove the 
fridge and freezer drawers so you can move the 
refrigerator to its final location. 
Do not remove the doors/drawer if you don’t need 
to. If you do not need to remove the refrigerator 
doors, go to ‘Leveling the Refrigerator’ on page 
16. 
If you need to remove the doors. continue below. 
Before removing the door/drawer, make sure you 
read the following items:
WARNING
Disconnect power to the refrigerator before 
removing the door or drawer.
•  Be careful not to drop, damage or 
scratch the door / drawer while removing 
them.
•  Be careful not to injure yourself while removing 
the doors / drawer.
•  Reattach the door/drawer properly to avoid: 
 
- Moisture from air leakage.
 
- Uneven door alignment.
 
- Wasting energy due to improper door seal.
WARNING
Disassembling the refrigerator doors
Be careful not to drop and scratch the doors while 
removing them.
DA68-02954A-07.indb   12
2015. 11. 5.   �� 6:31