Samsung 1600W Giga Shelf System Manuel D’Utilisation

Functions

Listening to the Radio

To Store the Stations You Want

You can store up to15 FM stations.

Select FM by pressing the TUNER button.

To search for a station, press the TUNING

MODE button on the remote control or the

STOP button on the product one or more times

until MANUAL is displayed.

3. Select a station by:

• Pressing and holding the TUNING

button on the remote control to

automatically search for active broadcasting

stations.

4. Press the MO/ST button to switch between

stereo and mono.
• In a poor reception area, select MONO for

a clear, interference-free broadcast.

• This applies only when listening to an FM

station.

5. If you do not want to store the radio station

found, go back to Step 3 and search for
another station.

Otherwise:

a. Press the MEMORY button.

• FM followed by a flashing number appears in

the display. That number is the current preset
number.

b. Press the 1, 2 button or the ,, .

buttons to scroll through and select a
preset number.

• You can select a number from 1 to 15.

c. Press the ¬ button to save the preset.

6. To store additional radio stations, repeat

Steps 3 to 5.

|NOTES |

✎

In Tuner mode

• In the Manual mode, you can use the

button to change stations.

• In the Preset mode, you can use the

or 2 button to search for a stored radio

station.

Selecting a Stored Station

To listen to a stored station, follow these steps:
1. Select FM by pressing the TUNER button on

the product or remote control.

2. Press the TUNING MODE button on the

remote control until “PRESET” is displayed.

3. Press 1, 2 button on the main unit or

TUNING 1, 2 on the remote control to

select a preset number.

Timer Function

Setting the Clock

For each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
1. Press the TIMER SET button on the remote

control twice. "CLOCK " is displayed.

2. Press the ¬ button on the remote control.

The hour flashes.
• T

o increase the hours: ,

• To decrease the hours: .

3. When the correct hour is displayed, press the

¬ button, and then the minutes flash.
• To increase the minutes: ,
• To decrease the minutes: .

4. When the correct minute is displayed, press

the ¬ button, and then " TIME" appears in
the display.

Setting the Timer

The timer enables you to set the product to switch
on or off at specific times automatically.
• Before setting the timer, confirm that the current

time is correct.

• For each step, you have a few seconds to set

the required options. If you exceed this time,
you must start again.

• If you no longer want the product to be

switched on or off automatically, cancel the
timer by pressing the TIMER ON/OFF button.

English

02793H-MX-JS5000-ZC-ENG-20160331.indd 21

2016/4/13 8:52:07