Samsung RT45H5809SL Top Mount Freezer with Digital Inverter 446 L Manuel D’Utilisation
Operating_13
O
20P
G
NI
TA
R
E
MAKING ICE
TWIST ICE MAKER MODEL
Making ice cubes
Remove the ice cube
tray by pulling it towards
you. Fill the tray
with water up to the
maximum water level
marked on the rear of
the tray.
Slide the tray back into
the holder, taking care
not to spill the water.
Wait until the ice cubes are formed.
Freezing time : It is recommended that you wait
for about one hour with the temperature set to
Power Freeze for the ice cubes to form.
Remove the ice cube
tray by pulling it towards
you. Fill the tray
with water up to the
maximum water level
marked on the rear of
the tray.
Slide the tray back into
the holder, taking care
not to spill the water.
Wait until the ice cubes are formed.
Freezing time : It is recommended that you wait
for about one hour with the temperature set to
Power Freeze for the ice cubes to form.
Removing the ice cubes
Make sure that the ice cube storage bin is in place
under the ice cube tray. If not, slide it into place.
Twist one of the levers firmly in the clockwise
direction until the tray twists slightly.
Result : The ice cubes fall into the storage bin.
Repeat Step 2 for the other half of the tray, if
necessary.
Remove the storage bin by:
• Lifting it slightly
• Pulling it towards you
Make sure that the ice cube storage bin is in place
under the ice cube tray. If not, slide it into place.
Twist one of the levers firmly in the clockwise
direction until the tray twists slightly.
Result : The ice cubes fall into the storage bin.
Repeat Step 2 for the other half of the tray, if
necessary.
Remove the storage bin by:
• Lifting it slightly
• Pulling it towards you
REMOVABLE ICE TRAY MODEL
Making ice cubes
Remove the ice cube tray by
pulling it towards you.
Fill the tray with water up to the
maximum water level marked
on the rear of the tray.
Slide the tray back into the holder, taking care not
to spill the water.
Remove the ice cube tray by
pulling it towards you.
Fill the tray with water up to the
maximum water level marked
on the rear of the tray.
Slide the tray back into the holder, taking care not
to spill the water.
Removing the ice cubes
To remove ice cubes, hold the tray at its ends and
twist gently.
To remove ice cubes, hold the tray at its ends and
twist gently.
Danger of explosion
Glass bottles containing liquids that
can freeze should never be stored in
Glass bottles containing liquids that
can freeze should never be stored in
the freezer as the glass will explode when the
contents freeze.
contents freeze.
To get more space, you can remove the
TWIST ICE MAKER, ICE STORAGE BIN and
ICE CUBE TRAY.
TWIST ICE MAKER, ICE STORAGE BIN and
ICE CUBE TRAY.
It does not affect thermal and mechanical
characteristics.
A declared storage volume of frozen food storage
compartment is calculated with these drawers
removed.
characteristics.
A declared storage volume of frozen food storage
compartment is calculated with these drawers
removed.
time, empty the refrigerator and turn it
off. Wipe the excess moisture from the
off. Wipe the excess moisture from the
inside of the appliance and leave the doors open.
This helps keep odour and mold from developing.
• If the refrigerator is not to be used for a long
This helps keep odour and mold from developing.
• If the refrigerator is not to be used for a long
period of time, pull out the power plug.
• The door guard for freezer is the two star section
so the temperature is slightly higher than the
other freezer compartments.
other freezer compartments.
WARNING
Water level
WARNING
DA68-02493B (KAYRA)-EN-0.2.indd 9
2011.5.24 11:56:59 AM