Samsung External Dispenser French Door Manuel D’Utilisation
English
11
01
SETTING
UP
With the door opened
1. Remove the 3 screws holding down the TOP
TABLE (
1 ) and separate the connected wires.
1
2. Disconnect the two connectors ( 2 ) on the
left side door. To remove the water coupler
from the hinge, twist and pull it from the hinge.
Remove the water line (
from the hinge, twist and pull it from the hinge.
Remove the water line (
3 ) while pressing the
marked part (
4 ) of the water line coupler.
2
3
4
3. Pull and remove the hinge lever ( 5 ). Remove
the ground screw (
6 ) attached to the upper
left door hinges with a philips screwdriver (+).
Remove the upper left and right door hinges
(
Remove the upper left and right door hinges
(
7 ).
5
6
7
4. Lift the door straight up to remove.
5. Remove the screw ( 8 ) attached to the
lower left and right door hinges with a philips
screwdriver (+). Remove the 2 hex head bolts
(
screwdriver (+). Remove the 2 hex head bolts
(
9 ) attached to the lower left and right door
hinges with an allen wrench (3/16”). Remove
the lower left and right door hinges (
the lower left and right door hinges (
10 ).
Allen wrench
10
8
9
RE-ATTACHING THE
REFRIGERATOR DOORS
REFRIGERATOR DOORS
To reattach the fridge doors after you have moved
the fridge to its final location, assemble the parts
in reverse order.
the fridge to its final location, assemble the parts
in reverse order.
1. The Water Line must be fully inserted into the
center of the transparent coupler (Type A)
or the Guide Lines (Type B) to prevent water
leakage from the dispenser.
or the Guide Lines (Type B) to prevent water
leakage from the dispenser.
Center of Transparent coupler
The Guide Lines
Dispenser
Type A
Type B
RF22KR_DA68-02897B-01_EN.indd 11
2016-03-30 12:47:46