Samsung 蓝光播放器 BD-F5500K Manuel D’Utilisation
15
Change PIN
Change the 4-digit password used to
Change the 4-digit password used to
access security functions
.
If you forget your password
1.
Remove any discs.
2.
Press and hold the @ button on the
front panel for 5 seconds or more.
All settings will revert to the factory
settings.
✎
NOTES
`
When the factory default settings are restored,
all the user stored BD data will be deleted
.
General Settings
Time Zone
Lets you specify the time zone that is
Lets you specify the time zone that is
applicable to your area
.
Support Settings
Software Upgrade
The Software Upgrade menu allows
The Software Upgrade menu allows
you to upgrade the player’s software for
performance improvements or additional
services
.
By Online
To upgrade By Online, follow these
To upgrade By Online, follow these
steps:
1.
In the player’s menu, go to Settings
> Support > Software Upgrade
2.
Select By Online, and then press
the v button. The Connecting to
Server message appears.
3.
A popup message will appear if an
update is available.
4.
If you select yes, download
process started. (Never turn the
player on during an upgrade.)
5.
When the update is completed,
the player will restart automatically
.
✎
NOTES
`
The upgrade is complete when the player
turns off, and then turns on again by itself.
`
Never turn the player off or back on
manually during the update process.
`
Samsung Electronics takes no legal
responsibility for player malfunction caused by
an unstable Internet connection or consumer
negligence during a software upgrade.
`
No disc should be in the product when you
upgrade the software by Online
.
By USB
To upgrade by USB, follow these steps:
To upgrade by USB, follow these steps:
1.
Visit www.samsung.com/
bluraysupport.
2.
Download the latest USB software
upgrade zip archive to your computer.
3.
Unzip the zip archive to your
computer. You should have a single
RUF file with the same name as the
zip file.
4.
Copy the RUF file to a USB flash drive.
5.
Make sure there is no disc in the
player, and then insert the USB
flash drive into the USB port of the
player.
6.
In the player’s menu, go to Settings
> Support > Software Upgrade.
7.
Select By USB
.
✎
NOTES
`
No disc should be in the product when you
upgrade the software using the USB Host jack.
`
When the software upgrade is done, check the
software details in the software Upgrade menu.
`
Do not turn off the player during the
software upgrade. It may cause the player to
malfunction.
`
Software upgrades using the USB Host jack
must be performed with a USB flash memory
stick only
.
Auto Upgrade Notification
If you have connected the player to your
If you have connected the player to your
network, and then set Auto Upgrade
Notification on, the player automatically
notifies you when a new software
version is available for the player.
To set Auto Upgrade Notification on,
follow these steps:
1.
Select Auto Upgrade Notification,
and then press the v button.
2.
Use the ▲▼ buttons to select On,
and then press the v button.
If there is a new software version
available, the player notifies you with a
popup message.
1.
To upgrade the firmware, select
yes in the Pop-up. The player turns
off automatically, then restarts, and
begins the download. (Never turn
the player on or off manually during
an upgrade.)
2.
The update progress popup
appears.
3.
When the update is completed,
the player will restart automatically
.
✎
NOTES
`
The upgrade is complete when the player
turns off, and then turns on again by itself.
`
Never turn the player off or on manually
during the update process.
`
Samsung Electronics takes no legal
responsibility for player malfunction caused
by an unstable Internet connection or
consumer negligence during software
upgrade
.
Contact Samsung
Provides contact information for
Provides contact information for
assistance with your player
.
Terms of Service Agreement
Lets you view the general disclaimer
Lets you view the general disclaimer
regarding third party contents and
services
.
Reset
Returns all settings to their factory
Returns all settings to their factory
defaults except for the network
settings
.