Samsung 蓝光播放器 BD-F5500K Manuel D’Utilisation

You can connect the Blu-ray player to an audio system using one of the 

methods illustrated below.

 - Do not connect the power cord to the wall outlet until you have made all the 

other connections.

 - When you change the connections, turn off all devices before you start

.

 

Method 1  Connecting to an HdMI supported AV receiver

• Connect an HDMI cable from the HDMI OUT jack on the back of the 

product to the HDMI IN jack on your receiver.

• Best quality (Recommended)

 

Method 2  Connecting to an AV receiver with dolby digital or a dTS decoder

• Using a digital Coaxial cable (not supplied), connect the Coaxial Digital 

Audio Out jack on the product to the Digital Coaxial In jack of the receiver.

• Good quality

• You will hear sound only through the front two speakers with Digital Output 

set to PCM

.

Audio

Audio

Method 2

Method 1

You can connect your player to your network router using one of the 

methods illustrated below.

To use the DLNA network functionality, you must connect your PC to your 

network as shown in the illustrations

.

Wired Network

Broadband 

service

Broadband 

service

Broadband modem  

(with integrated router)

Broadband 

modem 

Router

Or

 

✎

NOTES

 `

Internet access to Samsung's software update server may not be allowed, depending on the 

router you use or your ISP's policy. For more information, contact your ISP (Internet Service 

Provider).

 `

DSL users, please use a router to make a network connection

.