Samsung SRF828SCLS 828L Capacity French Door Refrigerator with Food Showcase Manuel D’Utilisation
English - 18
When moving your refrigerator
To prevent floor damage, be sure the front
adjusting legs are in the up position (above
the floor).
Refer to ‘Leveling the Refrigerator’ on
page 22.
adjusting legs are in the up position (above
the floor).
Refer to ‘Leveling the Refrigerator’ on
page 22.
Flat-blade screw
driver (-)
driver (-)
Control Lever
Flooring
For proper installation, you must place this
refrigerator on a level, hard surface that is the
same height as the rest of the floor.
This surface should be strong enough to support a
fully loaded refrigerator.
To protect the finish of the flooring, cut a large
section of the cardboard carton and place it under
the refrigerator where you are working.
When moving the refrigerator, you need to pull and
push it straight forwards or back.
Do not wiggle it from side to side.
refrigerator on a level, hard surface that is the
same height as the rest of the floor.
This surface should be strong enough to support a
fully loaded refrigerator.
To protect the finish of the flooring, cut a large
section of the cardboard carton and place it under
the refrigerator where you are working.
When moving the refrigerator, you need to pull and
push it straight forwards or back.
Do not wiggle it from side to side.
CAUTION
ACCESSORIES AND REQUIRED
TOOLS
TOOLS
The following accessory is included with your
refrigerator:
refrigerator:
Shim Hinge Middle 2 EA
Required Tools (Not provided)
You need the following tools to complete the
installation of your refrigerator:
installation of your refrigerator:
Philips
screwdriver (+)
Flat-blade screw
driver (-)
Socket wrench
10 mm
Pliers
Allen wrench
5 mm
DA68-03029B (EN)-04.indd 18
2015. 5. 8. �� 9:32