Samsung 蓝光播放器 BD-H4500 Manuel D’Utilisation
Change PIN
Change the 4-digit password used
Change the 4-digit password used
to access security functions.
If you forget your password
If you forget your password
1.
Remove any discs.
2.
Press and hold the
p
button on the
top panel for 5 seconds or more.
All settings will revert to the factory
settings.
✎
NOTES
`
When the factory default settings are restored,
all the user stored BD data will be deleted.
Support Settings
Software Upgrade
The Software Upgrade menu allows you to
The Software Upgrade menu allows you to
upgrade the player’s software for performance
improvements or additional services.
By USB
To upgrade by USB, follow these steps:
By USB
To upgrade by USB, follow these steps:
1.
Visit www.samsung.com/
bluraysupport.
2.
Download the latest USB software
upgrade zip archive to your computer.
3.
Unzip the zip archive to your computer.
You should have a single RUF file with
the same name as the zip file.
4.
Copy the RUF file to a USB flash drive.
5.
Make sure there is no disc in the
player, and then insert the USB flash
drive into the USB port of the player.
6.
In the player’s menu, go to
Settings >
Support > Software Upgrade.
7.
Select
By USB.
✎
NOTES
`
No disc should be in the product
when you upgrade the software
using the USB Host jack.
`
When the software upgrade is done,
check the software details in the
software Upgrade menu.
`
Do not turn off the player during the
software upgrade. It may cause the
player to malfunction.
`
Software upgrades using the USB
Host jack must be performed with a
USB flash memory stick only.
Contact Samsung
Provides contact information for
Provides contact information for
assistance with your player.
Reset
Returns all settings to their factory
Reset
Returns all settings to their factory
defaults except for the network settings.
Media Play
Playing a Commercially
Recorded Disc
1.
Press the 8 button to open the
disc tray.
2.
Place a disc gently into the disc tray
with the disc's label facing up.
3.
Press the 8 button to close
the disc tray. Playback starts
automatically.
Playing Files on a USB Device
There are two methods you can use to
play or view multimedia files located on
a USB device through your player.
Method 1
Method 1
1.
Turn the player on.
2.
Connect the USB device to the
USB port on the front panel
of the player. The New Device
Connected pop-up appears.
Change Device Settings
Play disc
Photos
Videos
Music
No disc
New device connected.
Photos
Videos
Music
Videos
Music
123
>
Move " Enter ' Return
✎
NOTES
`
If the pop-up does not appear, go to
Method 2.
3.
Use the ▲▼ buttons to select
Photos,
Videos or Music, and then press the
v
button. The Photos, Videos & Music
screen appears listing the content of the
device. Depending on how the contents
is arranged, you will see either folders,
individual files, or both.
✎
NOTES
`
Even though the player will display folders
for all content types, it will only display files
of the Content Type you selected in Step
3. For example, if you selected music, you
will only be able to see music files. You can
change this selection by returning to the
Photos, Videos & Music screen and going
to Step 3 in Method 2 below.
4.
If necessary, use the ▲▼◄►
buttons to select a folder, and
then press the v button.
5.
Select a file to view or play, and
then press the v button.
6.
Press the 返回 button to exit
a folder or the 退出 button to
return to the Home screen.
7.
Go to pages 14~16 for instructions that
explain how to control playback of videos,
music, and pictures on a USB device.
Method 2
1.
Turn the player on.
2.
Connect the USB device to the USB
port on the front panel of the player.
Select
Change Device and then
press the ▲▼ button to select
USB.
Press the v button.
13