Samsung 4-Door Flex RF34H9950S Series Manuel D’Utilisation

English - 24

( 3 )

Chef pantry will change to Fish/Meat or 
Fridge Mode automatically depending 
on the set fridge temperature. 
The Fish/Meat Mode lets you store fish 
and meat at their freshest for a short 
period of time. 
To store fish or meat for longer, put it 
into the Cool Select Room and select 
the “Freezer” or “Soft Freeze” functions.

•  If you set the fridge temperature to 

34~36 °F, the Chef Pantry changes 
to Fish/Meat Mode and the Fish/
Meat icon lights. 
The Chef Pantry is set to 30 °F 
(-1 °C) in the Fish/Meat mode.

•  If you set the fridge temperature to 

37~44 °F, the Chef Pantry changes 
to Fridge Mode and the Fridge Icon 
turns on.

( 4 )

•  The CoolSelect button lets you set 

the Cool Select Room on the bottom 
right of your refrigerator to one of 
four settings: Freezer, Soft Freezing, 
Chill, or Cool. Each time you touch 
the button, the setting changes.

•  The CoolSelect button also lets you 

reset the water filter life indicator.
After you replace the water filter, 
touch and hold this button for 3 
seconds to reset the water filter life 
indicator.

Freezer 

Select Freezer to set the Cool Select 
Room to the same temperature as the 
freezer.
•  Use this setting to keep frozen food 

fresh.

Soft 

Freeze

•  Select Soft Freeze to set the 

temperature in the Cool Select 
Room to 23 °F (-5 °C) .This feature 
helps keep meat and fish fresh 
longer.

Chill

•  Select Chill to set the temperature 

of the Cool Select Room to 30 °F 
(-1 °C).

Cool

•  Select Cool to set the temperature 

of the Cool Select Room to 41 °F 
(5 °C). You can keep water, juice, 
soft drinks, beer, etc. cold.

Water filter usage
This icon lights when you need
to change the filter, usually after the
refrigerator has dispensed about 300
gallons of water (after about 6 months). 

The icon will blink red for several 

seconds when you open or close the 

door.  

After you install the new water filter, 

reset the filter indicator by touching and 

holding the CoolSelect/hold 3 sec for 

Filter Reset button for 3 seconds.

•  If water is not dispensing or 

dispensing slowly, you need to 
replace the water filter because the 
water filter is clogged.

•  Some areas have large amounts of 

lime in their water, which causes the 

water filter to clog more quickly.

( 5 )

(Hold 3 sec for °C↔°F)

Energy 

Saving

Touching this button turns Energy 
Saving mode on and off. When you turn 
Energy Saving on, the Energy Saving 
icon lights.
Turn Energy Saving off and the icon 
goes off. The Energy Saving function is 
set to “ON” in the factory.  
If condensation or water drops appear 
on the doors, turn the Energy Saving 
mode off. 
This button also lets you switch the 
temperature displays between °C and 
°F. Touch and hold this button for 3 
seconds to switch the temperature 
units between °C and °F.

DA68-03013A-15.indb   24

2016. 3. 31.   �� 11:38