Samsung RF28HDEDBSR Manuel D’Utilisation

Page de 128
English - 14
LEVELING THE REFRIGERATOR
Make sure the refrigerator is level so that you can 
make final adjustments. 
Use a level to test if the refrigerator is level both 
side to side and back to front. 
If the refrigerator is not level, you will not be able 
to get the doors perfectly even, which may cause 
moisture condensation and increased energy bills. 
Below is an example of how to level the refrigerator 
if the left side of the refrigerator is lower than the 
right side.
How to adjust the level
1.  Open the freezer drawer and remove the lower 
basket.
2.  Insert a flat-blade screwdriver (-) into a notch on 
the left control lever, and then turn it counter- 
clockwise to level the refrigerator. 
(You turn the lever clockwise to lower the 
refrigerator and counterclockwise to raise it.)
flat-blade 
screwdriver (-)
Control Lever
CAUTION
Both control levers must be touching the floor to 
avoid possible personal injury or property damage 
because of tipping.
CAUTION
The refrigerator on an uneven floor may tilt. 
To prevent this, adjust the leg so that it contacts 
the floor.
If the right side is lower, perform the same 
procedure, but with the right control lever.
It is difficult to remove the cover leg 
front from the refrigerator, so we do not 
recommend making small adjustments 
with the control lever. 
Instead, refer to the next page for the best 
way to make minor adjustments to the 
doors.
MAKING MINOR ADJUSTMENTS 
BETWEEN DOORS
Remember, a leveled refrigerator is necessary for 
getting the doors perfectly even. 
If you need help, review the previous section on 
leveling the refrigerator.
Adjustment part
Fixed part
The left door is fixed. 
To make minor adjustments between 
doors, adjust only the right door.
DA68-03029A-07.indb   14
2015. 11. 6.   �� 11:34