Samsung External Dispenser Side-by-Side (RH22H9010 series) Manuel D’Utilisation

English - 21

SETTING

 UP

COMPLETING THE SET UP

Now that you have your new refrigerator installed 
in place, you are ready to set up and enjoy the 
features and functions of the appliance. 
By completing the following steps, your refrigerator 
should be fully operational.

1.  Make sure your refrigerator is in an appropriate 

location with reasonable clearance between it 
and the wall. Refer to installation instructions in 
this manual.

2.  Once the refrigerator is plugged in, make sure 

the interior light comes on when you open the 
doors.

3.  Set the Temperature control to the coldest 

temperature and wait for an hour. 
The freezer will get slightly chilled and the motor 
will run smoothly. 
Reset the refrigerator and freezer to the 
temperatures you want.

4.  After you plug the refrigerator in, it will 

take a few hours to reach the appropriate 
temperature. 
You can store food and drinks in the refrigerator 
after the temperature is sufficiently cool.

5.  Once installation is complete, press the 

dispenser lever to check if the water or the ice 
is properly dispensed.

6.  Make sure the front side of the refrigerator is 

0.6 degree higher than its rear side.

If condensation or water drops appear 
on both sides of the fridge door’s central 
part, turn the Energy Saver mode off after 
removing the condensation. 
(See the explanation of the Energy Saver 
button in “Using the Control Panel” on 
page 22.)

DA68-02976A-08.indb   21

2016. 7. 15.   �� 11:30