Samsung Curved LED Monitor Manuel D’Utilisation
20
Removing the Stand
― Before assembling the product, place the product down on a flat and stable surface so that the screen
is facing downwards.
: The product is curved. Placing pressure on the product when on a flat surface may damage the
product. When the product is on the ground facing up or down, do not put pressure on it.
1
Place the protective Styrofoam (cushion) included in the
package on the floor and place the product facing down
on the Styrofoam, as shown in the image.
If Styrofoam is unavailable, use a thick sitting mat.
package on the floor and place the product facing down
on the Styrofoam, as shown in the image.
If Styrofoam is unavailable, use a thick sitting mat.
2
While holding the upper part of the monitor with
one hand, pull the stand neck with the other hand in the
arrow direction to detach the stand.
one hand, pull the stand neck with the other hand in the
arrow direction to detach the stand.
3
Turn the connecting screw at the bottom of the stand
base to separate it.
base to separate it.
4
Remove the stand neck from the stand base by pulling it
in the direction of the arrow as shown in the figure.
in the direction of the arrow as shown in the figure.