Samsung Blu-ray Player H4500 Manuel D’Utilisation
Connections
Connecting to a TV
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of
the product to the HDMI IN jack on your TV.
- Do not connect the power cord to the wall outlet until you have made all the
other connections.
- When you change the connections, turn off all devices before you start.
Audio
Video
✎
NOTES
`
Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your
TV.
`
When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for the first
time, the player automatically sets the HDMI output resolution to the highest supported by the TV.
`
A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off in the menu.
`
To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed HDMI cable.
`
HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the
screen.
Connecting to an Audio System
You can connect the Blu-ray player to an audio system using illustrated below.
- Do not connect the power cord to the wall outlet until you have made all the
other connections.
- When you change the connections, turn off all devices before you start.
Connecting to an HdmI supported AV receiver
• Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back
of the product to the HDMI IN jack on your receiver.
• Best quality (Recommended)
Audio
8
BD_H4500_ZC-ENG-01 VE.indd 8
10/29/14 4:02 AM