Intel SR1695GPRX1AC Manuel D’Utilisation
![Intel](https://files.manualsbrain.com/attachments/5a71b1e7f60391972dadeef20435931cbf4621a5/common/fit/150/50/86c99b5f14aeb2708e9a9e1b5305af4ccf882c1af0155dad25413c2ed84e/brand_logo.png)
Environmental and Regulatory Specifications
Intel® Server System SR1695GPRX TPS
Revision
1.5
Intel order number: G11332-006
50
10. Environmental and Regulatory Specifications
10.1
System Level Environmental Limits
The following table defines the system level operating and non-operating environmental limits.
Table 58. System Office Environmental Summary
Parameter
Limits
Operating Temperature
+10
°C to +35°C with the maximum rate of change not to exceed 10°C per
hour
Non-Operating
Temperature
Temperature
-40
°C to +70°C
Non-Operating Humidity
50%- 90%, non-condensing with a maximum wet bulb of 28
°C
Acoustic noise
Sound Pressure: 55 dBA (Rackmount) in an idle state at typical office
ambient temperature. (23
ambient temperature. (23
°C +/- 2°C) Sound Power: 7.0 BA in an idle state at
typical office ambient temperature. (23 +/- 2 degrees C)
Shock, operating
Half sine, 2 g peak, 11 mSec
Shock, unpackaged
Trapezoidal, 25 g, velocity change 136 inches/sec (≧40 lbs to > 80 lbs)
Shock, packaged
Non-palletized free fall in height 24 inches (≧40 lbs to > 80 lbs)
Vibration, unpackaged
5 Hz to 500 Hz, 2.20 g RMS random
Shock, operating
Half sine, 2 g peak, 11 mSec
ESD
+/-15kV except I/O port +/-8KV per Intel
®
Environmental test specification
System Cooling
Requirement in BTU/Hr
Requirement in BTU/Hr
2050 BTU/hour
EMI operating
Required to meet EMI emission requirements, tested as part of system
10.2
Serviceability and Availability
The system is designed to be serviced by qualified technical personnel only.
The desired Mean Time To Repair (MTTR) the system is 30 minutes, which includes diagnosing
the system’s problem. To meet this goal, the system enclosure and hardware was designed to
minimize the MTTR.
the system’s problem. To meet this goal, the system enclosure and hardware was designed to
minimize the MTTR.
The following are the maximum time a trained field service technician should take to perform the
listed system maintenance procedures after diagnosing the system and identifying the
failed component(s).
listed system maintenance procedures after diagnosing the system and identifying the
failed component(s).
Table 59. Maintenance Activity Duration
Activity
Time Estimate
Remove and replace top cover
40 sec
Remove and replace hard disk drive
1 min 40 sec
Remove and replace power supply module(include cable routing)
4 min 35 sec
Remove and replace system blower/fan(each)
45 sec
Remove and replace backplane board(include cable routing)
6 min 15 sec
Remove and replace server board(include cable routing)
6 min 45 sec