Samsung SRF677CDBLS Manuel D’Utilisation

setting up

 

01

 

SETTING

 UP

Parts for water line Installation

Water line fixer and screws

Pipe connector

Water line

Connecting to the water supply line

1.  First, shut off the main water supply line.

2.  Locate the nearest cold, drinking water line.

3.  Follow the Water line Installation Instructions in 

the installation kit.

CAUTION

The water line must be connected to 
the cold water pipe. If it is connected 
to the hot water pipe, it may cause the 
purifier to malfunction.

Close Main
Water pipe

Close Main
Water pipe

No gap

4.  After connecting the water supply to the water 

filter, turn your main water supply back on 
and dispense about 3L to clear and prime the 
water filter.

Connecting the water line to the 
refrigerator

1.  Remove the cap from the water line on the unit 

and insert the compression nut of the water 
line into the water line on the unit.

2.  Connect the water line on the unit with the 

water line in the kit .

3.  Tighten the compression nut onto the 

compression fitting. There should be no gaps 
between (A, B & C )

4.  Turn water on and check for any leakage.

Only connect the water line to a drinkable 
water source. If you have to repair or 
disassemble the water line, cut off 6.5mm 
of the plastic tubing to make sure you get 
a snug, leak-free connection.

Remove 
cap

Water Line
from unit

Water Line
from Kit

No gap

Loosen a

Before being used, the leakage in these 
places should be examined.

•  Samsung Warranty does not cover 

WATER LINE 
INSTALLATION.

•  It will be done at 

customer’s charge 
unless the retail 
price includes 
installation cost.

•  Please contact Plumber or Authorized Installer 

for the installation if needed.

•  If Water leakage occurs due to improper 

installation, Please contact installer.

DA68-02916A (EN)-12.indd   21

2016. 3. 24.   �� 7:18