Samsung SRF677CDBLS Manuel D’Utilisation

operating

 

02

 OPERA

TING

To save electricity, the Panel Display turns off 
automatically under the following conditions: 
When no button has been pressed, when 
no doors are open, or when no Dispenser 
Lever has been pushed. However, the icon 
indicating your cubed or crushed ice selection, 
or sparkling water selection, will stay on.  
When you press a button, open a door, or 
push a Dispenser Lever, the Panel Display will 
turn on again. All function keys will  become 
operational after you remove your finger from 
the button you pressed.

Water filter usage
This icon lights up when you need 
to change the filter, usually after the 
refrigerator has dispensed about 300 
gallons of water (after about 6 months). 
The icon will blink red for several seconds 
when you open or close the door.  
After you install the new water filter, reset 
the filter indicator by touching and holding 
the Hold 3sec for Filter Reset button for 
3 seconds.

 

- If water is not dispensing or 

dispensing slowly, you need to 
replace the water filter because 
the water filter is clogged.

 

- Some areas have large amounts 

of lime in their water, which 
causes the water filter to clog 
more quickly.

CHANGING THE WATER 
FILTER

To reduce the risk of water damage 

to your property DO NOT use generic 

brands of water filters in your SAMSUNG 

Refrigerator.

USE ONLY SAMSUNG BRAND 

WATER FILTERS. SAMSUNG is not 

legally responsible for any damage, 

including, but not limited to, property 

damage caused by water leakage 

from the use of a generic water filter. 

SAMSUNG Refrigerators are designed to work 

ONLY WITH SAMSUNG Water Filters.

The Filter light turns red to let you know when it is 

time to change your water filter cartridge.

To give you time to get a new filter, the red light 

comes on just before the capacity of the current 

filter runs out. Changing the filter on time provides 

you with the freshest, cleanest water from your 

refrigerator.

To change the water filter, follow these steps:

1.  Shut off the water supply. Then, turn the water 

filter ( 

1 ) about 1/4 turn, counter-clockwise.

2

1

2.  Pull the water filter ( 1 ) from the case filter ( 2 ).

•  To change the water filter more easily, 

shut off the water supply valve.

•  Sometimes, it is hard to disassemble the water 

filter because impurities in the water cause it 
to stick. If you are having difficulties, grip the 
water filter firmly and pull it hard.

•  When you pull the water filter, a little water 

can leak from the opening. This is normal. 
To minimize the water leaks, keep the filter 
cartridge horizontal when you pull it.

•  To prevent overflow, 

empty the water 
filter tray ( 

3 ) and 

dry around the filter 
case ( 

2 ).

3.  Insert the new filter into the filter case ( 4 ).

4.  Push the filter, and then turn it clockwise until 

it locks.

•  If you have trouble inserting the water 

filter because of high water pressure, 
shut off the water supply valve.

•  The locked symbol should be lined up 

with the indicator line.

4

5.  Touch the “Alarm/hold 

3 sec for Filter Reset” 

button ( 

(Filter Reset)

 ) for 

about 3 seconds to reset 
the water filter. The color of 
the indicator ( 

 ) changes from red to off.

6.  If you turned off the water supply, turn it back 

on.

(Red)

3

2

DA68-02916A (EN)-12.indd   25

2016. 3. 24.   �� 7:18