Samsung SRF677CDBLS Manuel D’Utilisation

operating

 

02

 OPERA

TING

To remove 
•  Simply lift the bin up and pull straight out.

•  Tilt up the front of the drawer and pull straight 

out, and pull out the drawer after moving 
slightly in the direction of the arrow.

 To re-install 
•  Insert the drawer into the frame rails and push 

back into place.

•  Slide bin in above the desired location and 

push down until it stops.

The drawers need to be removed before 
the glass shelf above them can be lifted 
out.

5. Flex Zone

To remove the Flex Zone – Pull the Flex door 
out to full extension. Lift the Flex Zone up, pulling 
it to your body with both hands.

To re-install the Flex Zone – Open the Flex door 
to full extension. Tilt the front of the Flex Zone up, 
place the back of the Flex Zone onto the rails, and 
then lower the front until the whole Zone rests on 
the rails.

1

2

1.  Refer to page 18 for disassembly 

instructions.

2.  Open the cap cover rail with a flat-blade 

screwdriver.

Using the doors

Ensure that the doors close all the way and are 
securely sealed.
When the refrigerator door is only partially open, it 
will automatically close. If the the door is opened 
more than its auto close range, it will remain open. 
You must close it manually.

REMOVING THE FREEZER 
ACCESSORIES

To remove - Remove the freezer room guard ( 1 ) 
by lifting the guard up.

To re-install - Push down until the guard ( 1 ) 
locks into place.

1

2. Super Extended Drawer

To remove - Pull the drawer out to full extension. 

DA68-02916A (EN)-12.indd   33

2016. 3. 24.   �� 7:19