Samsung RF7500J FDR con 33" Diseño amplio, 580 L Guide D’Installation Rapide
( 5 )
Lighting
/ °C↔°F
(3sec)
The Lighting button serves two purposes:
- To turn the dispenser light on and off
- To switch the temperature units between ºC and ºF.
1) Light Function
Touching the Lighting button turns on the Dispenser LED lamp in continuous mode
so that it stays on continuously.
The button also lights up.
If you want the Dispenser lamp to come on only when some one uses the
dispenser, press the Lighting button to turn the continuous mode off.
Touching the Lighting button turns on the Dispenser LED lamp in continuous mode
so that it stays on continuously.
The button also lights up.
If you want the Dispenser lamp to come on only when some one uses the
dispenser, press the Lighting button to turn the continuous mode off.
2) To switch the temperature units between ºC and ºF.
Touch and hold this button for 3 seconds to select the temperature display you
want.
Each time you press and hold the button, the ºC and ºF temperature modes
alternate and the ºC or ºF icon lights up, indicating your selection.
Touch and hold this button for 3 seconds to select the temperature display you
want.
Each time you press and hold the button, the ºC and ºF temperature modes
alternate and the ºC or ºF icon lights up, indicating your selection.
( 6 )
Ice Maker
Off
If you don’t want to make more ice, touch the Ice Maker Off button.
The icon will light up and the Ice-Maker stops making ice.
The icon will light up and the Ice-Maker stops making ice.
We recommend you to stop ice making if the following occur:
- There is enough ice in the ice bucket.
- You want to save water and energy.
- Water is not being supplied to the refrigerator.
If the ice maker function is ON, and the water Line is not connected, there will be a
water valve noise from the back of the unit. Press the Ice Maker Off (Control Lock
(3sec)) button for less than 3 seconds until the Ice Off Indicator ( ) illuminates.
water valve noise from the back of the unit. Press the Ice Maker Off (Control Lock
(3sec)) button for less than 3 seconds until the Ice Off Indicator ( ) illuminates.
(7)
Water
Touch this button to dispense water.
This mode can not be used with the Ice Type mode simultaneously.
Water mode shuts off when you touch the Cubed / Crushed Ice button.
This mode can not be used with the Ice Type mode simultaneously.
Water mode shuts off when you touch the Cubed / Crushed Ice button.
To save electricity, the Panel Display turns off automatically under the following conditions: When no button
has been pressed, when no doors are open, or when no Dispenser Lever has been pushed.
However, the icon indicating your cubed or crushed ice selection, will stay on.
When you press a button, open a door, or push a Dispenser Lever, the Panel Display will turn on again.
Except for the Energy Saver, Water, and Cubed / Crushed Ice buttons, all function buttons will become
operational after you remove your finger from the button you are currently pressing.
has been pressed, when no doors are open, or when no Dispenser Lever has been pushed.
However, the icon indicating your cubed or crushed ice selection, will stay on.
When you press a button, open a door, or push a Dispenser Lever, the Panel Display will turn on again.
Except for the Energy Saver, Water, and Cubed / Crushed Ice buttons, all function buttons will become
operational after you remove your finger from the button you are currently pressing.