Manualsbrain.com
  1. Manuels
  2. Marques
  3. Samsung
  4. BD-H5500
  5. Manuel D’Utilisation

Samsung BD-H5500 Manuel D’Utilisation

Télécharger
Page de 48
Connections
Connecting to a TV
Connect an HDMI cable from the HDMI OUT jack on the back of the product to the HDMI IN 
jack on your TV. 
 - Do not connect the power cord to the wall outlet until you have made all the other 
connections.
 - When you change the connections, turn off all devices before you start.
Audio
Video
 
✎
NOTES
 ` If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital Audio 
Out on the player to an audio system to hear audio. 
 ` An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.
 ` Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of 
your TV.
 ` When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for the 
first time, the player automatically sets the HDMI output resolution to the highest supported by the TV.
 ` A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off in the menu.
 ` To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed HDMI cable.
 ` HDMI outputs only a pure digital signal to the TV. 
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on 
the screen.
Connecting to an Audio System
You can connect the Blu-ray player to an audio system using one of the methods illustrated 
below.
 - Do not connect the power cord to the wall outlet until you have made all the other 
connections.
 - When you change the connections, turn off all devices before you start.
 method 1  Connecting to an HdmI supported AV receiver
•  Connect an HDMI cable from the HDMI OUT jack on the back of the product to the HDMI IN 
jack on your receiver.
•  Best quality (Recommended)
 method 2  Connecting to an AV receiver with dolby digital or a dTS decoder
•  Using a digital Coaxial cable (not supplied), connect the Coaxial Digital Audio Out jack on the 
product to the Digital Coaxial In jack of the receiver.
•  Good quality
•  You will hear sound only through the front two speakers with Digital Output set to PCM.
Audio
Audio
Method 2
Method 1
8