Samsung BD-J5900 Manuel D’Utilisation

✎

NOTES

You can get the Network values from your

Internet provider.

8. When finished entering all the

values, and then press the RETURN

or ExIT buttons. The player verifies

the network connection and then

connects to the network.

Wireless Network
You can setup a wireless network

connection in four ways:

- Wireless Automatic

- Wireless Manual

- WPS(PBC)

- WPS(PIN)

When you configure the wireless network

connection, any wireless network devices

currently connected through the player

or, if applicable, the player's current wired

connection, will be disconnected.

Wireless - Automatic

1. In the Home screen, select Settings,

and then press the v button.

2. Select Network, and then press the

button.

3. Select Network Settings, and then

press the v button.

4. Select Wireless in the Network

Settings screen, and then press the

button. The player searches

for and then displays a list of the

available networks.

Move " Select '

Return

Network Settings

Select your network type.
Network type Wireless
Wireless network

Add Network

You can connect your Blu-ray

player to the internet. Please

select which wireless network

to use.

WPS(PBC) Search

5. Select the desired network, and then

press the v button.

6. On the Security screen, enter your

network's Security Code or Pass

Phrase.

Enter numbers directly using the

number buttons on your remote

control. Enter letters by selecting a

letter with an arrow button, and then

pressing v button.

7. When done, select done and then

press the v button. The player

verifies the network connection and

then connects to the network.

8. When verification is complete, select

OK, and then press the v button.

✎

NOTES

You should be able to find the Security Code or

Pass Phrase on one of the set up screens you

used to set up your router or modem.

Wireless - Manual

If you have a static IP address or the

Automatic procedure does not work,

you'll need to set the Network Settings

values manually.

1. Follow the directions in Wireless -

Automatic through Step 5.

2. The player searches for a network,

and then displays the connection

failed message.

3. On the bottom of the screen, select

Ip Settings, and then press the v

button.

The IP Settings screen appears.

4. Select the IP Setting field, and then

press the v button.

5. Select Enter manually in the IP

Setting field, and then press the v

button.

6. Select a value to enter (Ip Address,

for example), and then press v

button. Use the number keypad

on your remote control to enter the

numbers for the value. Use the ◄►

buttons on the remote control to

move from entry field to entry field

within a value. When done with one

value, press the v button.

7. Press the ▲ or ▼ button to move

to another value, and then enter the

numbers for that value following the

instructions in Step 6.

8. Repeat Steps 6 and 7 until you have

filled in all values.

✎

NOTES

You can get the Network values from your

Internet provider.

9. When finished, and then press

the RETURN or ExIT button. The

Security Screen appears.

10. On the Security screen, enter your

network's Security Code or Pass

Phrase. Enter numbers directly using

the number buttons on your remote

control. Enter letters by selecting a

letter with the ▲▼◄► buttons, and

then pressing the v button.

11. When finished, select done at the

right of the screen, and then press

the v button.

The player verifies the network

connection and then connects to

the network.

12. After the player verifies the network,

select OK, and then press the v

button.

WpS(pBC)

1. In the Home screen, select Settings,

and then press the v button.

2. Select Network, and then press the

button.

3. Select Network Settings, and then

press the v button.

4. Select Wireless in the Network

Settings screen, and then press the

button.

5. Press the ▲▼ button on your

remote, and then press the ◄►

button to select the WpS(pBC).

6. Press the v button on your

remote. The "Press the PBC button"

message appears.