Samsung RL66SBPN Manuel D’Utilisation

safety information

 

safety information

SEVERE WARNING SIGNS

•   In order to avoid the creation of a flammable gas-air mixture if a leak in the refrigerating circuit

occurs, the size of the room in which the appliance may be sited depends on the amount of 
refrigerant used.

•   Never start up an appliance showing any signs of damage. If in doubt, consult your dealer.
•   The room must be 1

㎥ in size for every 8g of R600a refrigerant inside the appliance.

•   The amount of refrigerant in your particular appliance is shown on the identification plate inside

the appliance.

•   Please dispose of the packaging material for this product in an environmentally friendly manner.
•   Pull the power plug out of the socket before changing the interior light of the refrigerator. 

- Otherwise, there is a risk of electric shock.

•   Do not place this refrigerator in direct sunlight or expose to the heat from stoves, room heaters

or other appliance.

•   Allow sufficient space to install the refrigerator on a flat surface. 

- If your refrigerator is not level, the internal cooling system may not work correctly.

•   Do not plug several appliances into the same power socket. The refrigerator should always be

plugged into its own individual electrical which has a voltage rating that matched the rating plate. 
-  This provides the best performance and also prevents overloading house wiring circuits, which 

could cause a fire hazard from overheated wires.

•   Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly and pull

straight out from the outlet. 
- Damage to the cord may cause a short-circuit, fire and/or electric shock.

•   Make sure that the power plug is not squashed or damaged by the back of the refrigerator.
•   Do not bend the power cord excessively or place heavy articles on it. 

- This constitutes a fire hazard.

•   Have the power cord repaired or replaced immediately by the manufacturer or its service agent if

power cord has become frayed or damaged.

•   Do not use a cord that shows cracks or abrasion damage along its length or at either end.
•   If the power cord is damaged, have it replaced immediately by the manufacturer or its service

agent.

•   When moving the refrigerator, be careful not to roll over or damage the power cord.
•   Do not insert the power plug with wet hands.
•   Unplug the refrigerator before cleaning and making repairs.
•   Do not use a wet or damp cloth when cleaning the plug.
•   Remove any foreign matter or dust from the power plug pins. 

- Otherwise there is a risk of fire.

•   If the refrigerator is disconnected from the power supply, you should wait for at least ten minutes

before plugging it back.

•   If the wall socket is loose, do not insert the power plug. 

- There is a risk of electric shock or fire.

•   The appliance must be positioned so that the plug is accessible after installation.

•   Do not install the refrigerator in a damp place or place where it may come in contact with water. 

- Deteriorated insulation of electrical parts may cause an electric shock or fire.