Samsung MX-J630 Manuel D’Utilisation

               

The speaker connector terminals are located 
on the rear of the system.

1.  To ac

hieve the correct sound quality, insert 

the speaker connector cables identified below 
into the correct speaker terminals on the back 
of the system.  

•  Left speaker (marked L). 
•  Right speaker (marked R). 

•  This jack  is for service only. Please do not 

use. 

1.  Use an Audio Cable (not supplied) to connect 

AUX IN on the product to Audio Out on an 
external analog component.

  

•  Be sure to match connector colors. 
•  If the external analog component has only 

one Audio Out jack, connect to either the 
left or right terminal.

• Press the TUNER/AUX button on the 

main unit or press the AUX button on the 

remote control to select the AUX input.

• When the unit is in AUX mode, if none of 

the buttons are pushed for more than 8 
hours, the power will automatically turn 
off.

1.  Connect the FM antenna (supplied) to the FM 

Antenna jack. 

2.  Slowly move the antenna wire until you find a 

location where reception is good, then fasten it 
to a wall or other rigid surface.

3.  If reception is poor, you may need to install an 

outdoor antenna. To do so, connect an outdoor 
FM antenna to FM antenna jack on the rear 
of the system using a 75Ω coaxial cable (not 
supplied).