Samsung SRF836WDRS Manuel D’Utilisation

English - 19

SETTING

 UP

Required Tools (Not provided)

You need the following tools to complete the 
installation of your refrigerator:

Philips 

screwdriver (+)

Flat-blade screw 

driver (-)

Socket wrench 

(13/32”) (10 mm)

Pliers

Allen wrench 

(3/16”) (5 mm)

With the door opened

1.  Remove 3 screws holding down the TOP 

TABLE ( 

1 ) and separate the connected wires.

(1)

2.  Disconnect two connectors ( 

2 ) on the left side  

door. To remove the water coupler from the 
hinge, twist and pull it from the hinge. 
Remove the water line ( 

3 ) while pressing the 

marked part ( 

4 ) of the water line coupler.

(2)

(3)

(4)

3.  Pull and remove the hinge lever ( 

5 ). Remove 

the ground screw ( 

6 ) attached to the upper 

left door hinges with a philips screwdriver (+). 
Remove the upper left and right door hinges 
( 

7 ).

(5)

(7)

(6)

DA68-03055B (EN)-02-���.indd   19

15. 5. 7.   �� 2:51