Samsung HMX-H400BP Manuel D’Utilisation
![Samsung](https://files.manualsbrain.com/attachments/d2c8096d7455ef27430abd90929788cd334aa0d9/common/fit/150/50/48a08a3a1c58307d54cf32c153d229d06984b46e0de4abbefb9df295a8d8/brand_logo.png)
System setting
Demo
Demo mode automatically shows you the major functions that are
included with your camcorder so that you may use them more
easily.
1.
Touch the Menu (
) Setting
( ) tab “Demo.”
2.
Touch the desired submenu item.
3.
To exit the menu, touch the Exit
(
) or Return (
) tab.
Using the Demo function
You can easily operate demo function touching Menu (
) tab for 5
seconds.
The Demo mode is canceled in the following cases:
- If the LCD screen is touched.
- If you press any button (Recording start/stop, Anti-shake
(OIS), Display (
), SMART AUTO, MODE, PHOTO, etc.).
However, the camcorder enters the Demo mode automatically
after 5 minutes in STBY mode if it is idle for 5 minutes without an
operation. If you don’t want the Demo function to start, set “Demo”
to “Off.”
The Demo function does not operate in the following case:
- If you set “Auto Power Off” to “ Min” and you are using the battery
to power the camcorder, the Auto Power Off function turns the
camcorder off before Demo can run.
Anynet+(HDMI-CEC)
This camcorder supports Anynet+. Anynet+ is an AV network
system that lets you control all connected Samsung AV devices with
an Anynet+ supported Samsung TV remote control.
1.
Touch the Menu (
) Setting
( ) tab “Anynet+(HDMI-
CEC).”
2.
Touch the desired submenu item.
3.
To exit the menu, touch the Exit
(
) or Return (
) tab.
When you turn on the camcorder and it is connected by an
HDMI cable to a TV that supports Anynet+, the TV automatically
turns on. If you do not want to use the Anynet+ function, set the
“Anynet+(HDMI-CEC)” to “Off.”
For details on the Anynet+(HDMI-CEC) function, refer to the user
manual of Samsung’s Anynet+ supported TV.
•
•
Submenu items
Off: Disable the Demo function.
On: Enables the Demo function.
•
•
Submenu items
Off: Disables the function.
On: The Anynet+ function is enabled.
When the camcorder is connected to an Anynet+
supported TV, you can operate some functions of the
camcorder using the TV’s remote control.
•
•
Off
On
Demo
1/1
Off
On
Anynet+(HDMI-CEC)
1/1