Samsung SR8900 ROBOT VC with Auto-Emptying Dust Bin, 40 Watt, Silver Metal Manuel D’Utilisation

Page de 60
Samsung Smart Home App 
_53
05
 
S
AMSUNG
 S
MAR
T
 H
OME
 A
PP
REMARKS AND RECOMMENDATIONS
Video Streaming
The video streaming feature requires an upload speed around 1Mbps or more. To ensure the non-
interrupted service, you can allocate enough bandwidth to Robot Vacuum’s IP if your wireless router 
supports Quality of Service settings. Please refer to an advanced setting section of the user manual 
for your wireless router. It is important to note that many factors can affect speeds including volume of 
internet traffics, your equipment, location, etc.
Wi-Fi Range Extension
You can install any additional wireless router (repeater or extender) to extend the range of your existing 
Wi-Fi network for Robot Vacuum. However, both routers should use the same SSID, password, 
authentication, and encryption. A certain wireless repeater can be automatically configured using the 
same options as the main router by default. If not, please make sure that your candidate device provides 
settings to freely configure those options. We recommend a simple wireless repeater that doesn’t have a 
DHCP server feature or a MAC address alteration feature. The transition time between adjacent wireless 
networks will be around 1 to 2 minutes.
Firewalls 
Please note that some routers come with a built-in firewall. Under firewall environments, you will 
experience slow-down in your connection or even encounter failure to connect the streaming service of 
Robot Vacuum. If you want to enhance the performance in such cases, you can disable the firewall at 
your own risk.
Data Usage 
If you don’t have an unlimited data plan, you should carefully monitor the usage while using the streaming 
service of Robot Vacuum. It consumes around 1Gbyte of your data if you stream 10 minutes per day for a 
month.
Automatic Return 
In idle mode, the Robot Vacuum will automatically go back to the charger unless any command is 
executed for more than 15 minutes or the video streaming is progressed.
Software Update 
When you reset the Robot Vacuum and keep it connected to the charger, it will check to see if any 
firmware update is available. If there is an update available, it will be automatically downloaded and 
updated. Please note that the emergency switch is located on the bottom side of the cleaning robot.
DJ68-00630D (EN)-00.indd   53
2014. 7. 23.   �� 6:15