Samsung 300W 2.1Ch Flat Soundbar HW-K450 Manuel D’Utilisation

Adjusts the volume level of the unit.

Turns the Soundbar on and off.

Press to select TREBLE, BASS, SUB WOOFER LEVEL,  AUDIO SYNC, 

REAR 

SPEAKER, or REAR LEVEL

.  

Then, use the ,  buttons to adjust the Treble or Bass volume from -6 ~ +6,  

SuB WOOFer LeVeL volume from -12, -6 ~ +6.

Press and hold the SOUnD COnTROL button for about 5 seconds to adjust 

the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2KHz, 2.5KHz, 

5KHz and 10KHz are selectable and each can be adjusted to a setting between 

-6 and +6.

•  To adjust the woofer level using the Samsung Audio remote mobile app, 

press the [, ] buttons to decrease or increase the woofer level within 3 

seconds of pressing the WOOFER button. 

If the Soundbar is connected to a digital TV and the video appears out of sync 

with the audio, press the SOUnD COnTROL button to select AuDIO SYNC  to 

sync the audio with the video. use the ,  buttons to set the audio delay 

between 0 ms and 300 ms. In uSB mode, TV mode, and BT mode, the Audio 

Sync function is not available.

To control the volume of the rear speaker sound, select REAR SPEAKER in 

Sound Control, and then adjust the volume between OFF-rS and ON-rS by 

using the ,  buttons.

To control the volume of the rear level sound, select REAR LEVEL in Sound 

Control, and then adjust the volume between rS -6~+6 by using the ,  

buttons.

•  The REAR SPEAKER and the REAR LEVEL mode are only available when 

you connect the SWA-8000S (sold separately). 

Press the p button to pause a file temporarily. 

Press the p button again to play the selected file.

If there is more than one file on the device you are playing, and you press 

the [ button, the previous file is selected.

1.  Press and hold the 

 SOUND button for more than 5 seconds while the Soundbar is turned on.

2.  "ON - TV reMOTe" appears on the Soundbar's display.
3.  In the TV's menu, set the TV speaker to external speaker.

 

●

TV menus differ by manufacturer and model. refer to the TV's user manual for further information.

●

Only the VOLuMe +/- and the MuTe buttons will be available to control the Soundbar.

●

This function is not available when the Soundbar is in the TV SoundConnect, TV ArC, or HDMI mode. 

●

Manufacturers supporting this function: 

  - VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, GruNDIG, Hisense, rCA

      - This function may not be compatible with your TV's remote depending on the remote control's  

         manufacturer.

●

each time you press and hold the 

 SOUND button for 5 seconds, ON-TV reMOTe and OFF-TV 

reMOTe alternate. 

1.  use a suitable coin to turn the 

remote control's battery cover 

counterclockwise to remove it 

as shown in the figure above.

2.  Insert a 3V lithium battery. Keep the 

positive (+) pole facing up when inserting 

the battery. Put the battery cover on and 

align the '●' marks side by side as 

shown in the figure above.

3.  use a suitable coin to 

turn the remote control 

battery cover clockwise 

as far as it will go to fix it 

in place.