Samsung BD-ES6000E Manuel D’Utilisation

04
Settings

When you connect this player to a network, 

you can use network based applications and 

functions such as Smart Hub and BD-LIVE, 

and upgrade the player's software through the 

network connection. For more information about 

accessing and using Internet services, see the 

Network Services chapter of this manual on pages 

43~45. Instructions for configuring the network 

connection start below.

Configuring Your Network Connection

Before you begin, contact your ISP to find out 

if your IP address is static or dynamic. If it is 

dynamic, and you have a wired or wireless 

network, we recommend using the Automatic 

configuration procedures described below. 

If you are connecting to a wired network, connect 

the player to your router using a LAN cable before 

you start the configuration procedure. 

If you are connecting to a wireless network, 

disconnect any wired network connection before 

you begin. 

To begin configuring your network connection, 

follow these steps:
1.  In the Home screen, select Settings, and 

then press the v button.

2.  Select Network, and then press the v 

button.

3.  Select Network Settings, and then press the 

 button.

4.  Go to the instructions for Wired networks 

starting below or the instructions for Wireless 

networks starting on page 26.

Wired Network

 

Ğ

Wired - Automatic

After following Steps 1 to 3 above:
1.  Select Start in the Network Settings screen, 

and then press the v button. The player 

detects the wired connection, verifies the 

network connection and then connects to the 

network.

 

Ğ

Wired - Manual

If you have a static IP address or the Automatic 

procedure does not work, you'll need to set the 

Network Settings values manually.

After following Steps 1 to 3 above:
1.  Select Start in the Network Settings screen, 

and then press the v button. 

The Network Status screen appears. 

The player attempts to verify the network 

connection and fails.

2.  Select IP Settings on the right of the screen, 

and press the v button. 

The IP Settings screen appears.

3.  Select the IP Mode field, and then set it to 

Manual.

4.  Use the number keypad on your remote to 

enter the Network values. Use the ▲▼◄► 

buttons on the remote to move from entry 

field to entry field.

 |NOTE |

 

You can get these values from your Internet provider. You 

can also view these values on most Windows computers. 

For instructions, see "Getting the Network Settings 

Values." on page 26.

5.  When done, highlight OK, and then press 

 button. The player verifies the network 

connection and then connects to the 

network.

IP Settings

OK

Retry

Previous

Network Settings

Wired network connection failed.

Unable to connect to the network. Try the following: check if 

your IP address is set correctly in IP Settings. Contact your 

Internet service provider for more information.

MAC Address  XX:XX:XX:XX:XX:XX

IP Address 

0.0.0.0

Subnet Mask 

0.0.0.0

Gateway 0.0.0.0

DNS Server 

0.0.0.0

English  

 

|