Samsung 27" 卓越電視(LED)顯示器 顯示器、電視兼用 TD590 Manuel D’Utilisation
Setting up Anynet+ (HDMI-CEC)
•
Anynet+ (HDMI-CEC)
To use the Anynet+ Function,
Anynet+ (HDMI-CEC)
must be set to
On
.
✎
When the
Anynet+ (HDMI-CEC)
function is disabled, all the Anynet+ related operations are deactivated.
•
Auto Turn Off
Set an Anynet+ Device to turn off automatically when the product is turned off.
✎
If
Auto Turn Off
is set to
Yes
, running external devices will turn off at the same time as the product powers off.
✎
May not be enabled depending on the device.
Switching between Anynet+ Devices
1. Open the
Tools
menu using your remote, and then select
Anynet+ (HDMI-CEC)
.
2. Select a device, and then wait until the switch to the selected device is completed.
✎
The menu appears only when you set
Anynet+ (HDMI-CEC)
to
On
in the
System
menu.
✎
Switching to the selected device may take up to 2 minutes. You cannot cancel the switching operation while
switching is in progress.
switching is in progress.
✎
If you have selected an Anynet+ device using the
Source
function , you cannot use the Anynet+ function.
Make sure to switch to an Anynet+ device.
English - 60
English - 61
Advanced Features