Samsung RS7778FHCSR Manuel D’Utilisation

English - 22

Remove any residual matter inside 
the purifi er. (Model with the coolselect 
zone)

1.  Turn ON the main water supply.

2.  Run water through the dispenser until the water 

runs clear (approximate 3 liter).

The initial dark discoloration of water and ice is 
normal

INSTALLING THE WATER 
DISPENSER LINE

For Exterior model
Parts for water line Installation 

Connecting to the water supply line

Connect the water pipe with coupler and tap.
1. Close the main water tap.
2. Connect coupler “A” to the tap.

select the location where the purifi er is to 
install. (Model with the purifi er)

-    If you wish to reassemble the water inlet and outlet 

sides of the purifi er during purifi er installation, see 
the reference illustration.

-    Cut the water line attached to the purifi er to the 

appropriate place after measuring the distance 
between the purifi er and the cold water tap.

WARRANTY INFORMATION

This water line installation is not covered by the 
refrigerator or ice maker manufacturer’s warranty.
Follow these instructions carefully to minimise the risk of 
expensive water damage.

Note:

If the coupler does not fi t on the current tap, go
the nearest authorized service dealer and purchase the 
right couplers fi ttings.

COUPLER “A”

TAP

COUPLER

SIDE OF

PURIFIER

WATER INLET
SIDE OF PURIFIER

LINE OUTLET

90 degree

PURIFIER WATER

CAUTION

Locking Clip

Locking Clip

Insert  Locking  Clip  After 

Insert Locking Clip After 

tube seated

tube seated

Water line fi xer and screws

Pipe connector

Water line

Purifi er lock-clip

Purifi er

CAUTION

The water line must be connected to the cold 

water pipe. If it is connected to the hot water 

pipe, it may cause the purifi er to malfunction.

DA68-02710S-02.indb   Sec4:22

DA68-02710S-02.indb   Sec4:22

2013. 12. 26.   

 7:18

2013. 12. 26.   

 7:18