Samsung שואב עומד VU4000 בעיצוב Motion Sync Design™, 1000 וואט, זהב מנדרינה Manuel D’Utilisation

English - 27

Troubleshooting

Check this list of problems and possible solutions before bringing your vacuum to a service 
center.

Vacuum won’t run.

•  Check the electrical plug. Make sure it is fully plugged in.
•  Press the Power on/off button.
•  Reset overload protector.

Suction Motor does 
not start.
Thermal protector 
activated.

•  Allow the vacuum to cool.

Brush Motor does not 
start.

•  Check the brush ON/OFF button.
•  Cut hair or string off the brush.
•  Reset the overload protector.

Vacuum won’t pick up 
or low suction.

•  Empty the dust bin.
•  Clean the filter and confirm that the filter assembly is positioned 

properly.

•  Check the hose connection or flow path.

Dust escaping from 
the vacuum.

•  Empty the dust bin.
•  Clean the pre-motor filters.
•  Clean or replace the exhaust filter.
•  Confirm that the filter assembly is positioned properly.

Cleaner tools won’t 
pick-up.

•  Check inlets, pipe, and dust bin for obstructions. 

Remove obstruction. 

•  Empty the dust bin.
•  Remove and clean the filters.
•  Confirm that the dust bin is locked properly.

The sky blue button 
won't return to 
position after being 
pushed.

•  Check the diverter.
•  Clean the cover and inside of diverter.

This Vacuum cleaner is approved the following.
EMC Directive : 2004/108/EEC
Low Voltage Directive : 2006/95/EC

DJ68-00709E (EN)-00.indd   27

2014. 4. 29.   �� 9:07