Samsung BD-D7000 Manuel D’Utilisation

English

Setup

Audio Sync

In some cases when the player is connected to 

a digital TV, the audio signal may not synchronize 

with the video signal. If this occurs, adjust the 

audio delay time to match the video signal.

•  You can set the audio delay time between 0 

msec and 200 msec.  

Adjust it to the optimal setting.

 

✎

NOTE

 ` The audio delay time you specify may not be exact 

depending on the played content.

Before you begin, contact your ISP to find out 

if your IP address is static or dynamic. If it is 

dynamic, and you are using a wired or wireless 

connection, we recommend using the Auto setup. 

If you are using a wireless connection and your 

router has the capability, you can use WPS(PBC) 

or One Foot Connection.

If your IP address is static, you must use the 

manual set up procedure for both wired and 

wireless connections.

Network Settings

To begin setting up the network connection for 

your player, follow these steps:
1.  In the Home menu, press the ◄► buttons to 

select Settings, and then press the ENTER 

button.

2.  Press the ▲▼ buttons to select Network, and 

then press the ENTER button.

3.  Press the ▲▼ buttons to select Network 

Settings, and then press the ENTER button.

4.  Press the ▲▼ buttons to select Wired, 

Wireless (General), WPS(PBC) or One Foot 

Connection, and then press the ENTER 

button.

5.  If you have a wired network, go to the next 

section, Wired Network below. If you have a 

wireless network, go to Wireless Network on 

pages 37~39.

Wired Network

Setting Up a Wired Connection - Auto
1.  Press the ▲▼ buttons to select Wired.

2.  Press the ENTER button. 

The Network Status screen appears. The 

player connects to the network after the 

network connection is verified.

Setting Up a Wired Connection - Manual
If you have a static IP address or the Auto Setting 

does not work, you’ll need to set the Network 

Settings values manually.

To view your Network Settings values on most 

Windows computers, follow these steps:

 ƒ Windows XP 

1.  Right click the Network icon on the bottom 

right of the Windows desktop.

2.  In the pop-up menu, click Status.
3.  On the dialog that appears, click the Support 

tab.

4.  On the Support tab, click the Details button. 

The Network settings are displayed.

 ƒ Windows 7

1.  Click the Network icon on the bottom right of 

the Windows desktop.

2.  In the pop-up menu, click Network and 

Sharing Centre.

Settings

Display
Audio

Network

System
Language
Security
General
Support

Network Settings

 Move    " Enter    ' Return

Select a network connection type.

Wired

Wireless 

(General)

WPS(PBC)

One Foot 

Connection

Connect to the network using LAN cable. Please make 

sure that the LAN cable is connected.