Samsung T19B300EW Manuel D’Utilisation
14
English
Connections
Connecting to an Antenna
When the LED display is initially powered on, basic settings proceed automatically.
✎
Preset: Connecting the mains and antenna.
ANT OUT
Power Input
Setup (Initial Setup)
When the LED display is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER
P button. Setup is available only when the Input Source is set to TV.
✎
Before turning on the LED display, make sure the antenna cable is connected.
1
Selecting a menu
language
language
Press the u or d button to select a menu language. Press
ENTER
E button
twice when done.
P
2
Selecting Store Demo
or Home Use
or Home Use
Press the u or d button, then press the
ENTER
E button.
x
Select the Home Use mode. Store Demo Mode is for retail environments.
x
To return the unit’s settings from Store Demo to Home Use (standard):
Press the volume button on the LED display. When you see the volume
OSD, press and hold
Press the volume button on the LED display. When you see the volume
OSD, press and hold
MENU
for 5 sec.
x
Store Demo is only for shop display. If you select it, several functions are
not able to use. Please select Home Use when you watch at home.
not able to use. Please select Home Use when you watch at home.
3
Selecting an area
Press the
ENTER
E button. Select the appropriate area by pressing the u or d button.
Press the
ENTER
E button to confirm your choice.
4
Auto Tuning
Press the u or d button to select correct option, and then press
ENTER
E button twice.
x
I use an aerial cable. Memorise all of the available channels using RF cable. (Auto Tuning
necessary)
necessary)
x
I use a cable or satellite service. You don't need to use Auto Tuning to find channels.
✎
You can complete Setup by selecting it.
x
Air / Cable: Select the antenna source to memorise.
Digital & Analogue / Digital / Analogue: Select the channel source to memorise.
Digital & Analogue / Digital / Analogue: Select the channel source to memorise.
✎
You can check more details on page22.
5
Setting the Clock Mode Set the Clock Mode automatically or manually.
x
Auto: Select the time zone (depending on the country) where you are located.
x
Manual: Allows you to manually set the current date and time.
✎
If the customer chooses "I use a cable or satellite service." in step 4, the clock just
can be set manually.
can be set manually.
6
Complete
Press the
ENTER
E button.
If You Want to Reset This Feature...
Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”. If you want to change the
PIN number, use the Change PIN function.
You should do Setup (
Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”. If you want to change the
PIN number, use the Change PIN function.
You should do Setup (
MENU
→ System) again at home although you did in shop.
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN
to “0-0-0-0”:
to “0-0-0-0”:
POWER
(off)
→
MUTE
→ 8 → 2 → 4 →
POWER
(on).