Samsung RF62QERS Manuel D’Utilisation

 

setting up

When you turn the hex wrench counter-
clockwise ( 

 ), the door will move up.

Only the left-door height is adjustable for 
Swing-Type.

1.  After adjusting the doors, please insert the 

supplied fastener ( 

5 ) using Pliers ( 6 ) in the gap 

between the hinge-grommet ( 

7 ) and the middle 

hinge ( 

8 ). The number of fasteners you’ll need to 

insert depends on the gap.

2 fastener are enclosed with the refrigerator.
The thickness of each fastener is 1.0mm.

MAKING MINOR ADJUSTMENTS 
BETWEEN DOORS

Remember, a level Refrigerator is necessary for 
getting the doors perfectly even. If you need 
help, review the previous section on leveling the 
Refrigerator.

1.  Pull out the freezer drawer ( 1 ), then you can see 

the middle hinge ( 

2 ) .

2.  Insert the supplied hex wrench ( 3 ) into the shaft 

( 

4 ) of the middle hinge.

3.  Please adjust the height by turning the hex 

wrench ( 

3 ) clockwise ( 

 ) or counter-

clockwise ( 

 ).

When the left door 

is lower than the 

right door.

Adjustment 

part

When the left door 
is higher than the 
right door.

Adjustment 
part