Samsung RF858VALASL Manuel D’Utilisation

 

setting up

DISASSEMBLE THE FREEZER 
DOORS

•  Be sure to remove the Fridge Door 

before removing the Freezer Door.

•  Be careful with the wires attached to 

the bottom of the Freezer Door while 
disassembling.

1.  With the door open, remove the screw holding 

the cover (A) of the Adjustable Leg at the 
bottom of the door with a Phillips (+) 
Screwdriver, and then disassemble the 
Connector (B).

2.  Lift up and remove the Mid Hinge Cap (C) on 

the Door Hinge above the Freezer Door. 

3.  While pushing the door in the direction of the 

arrow, lift up the Mid Hinge Shaft (D). 

4.  Being careful that the door does not touch the 

Mid Hinge (E), tilt the Door forward a little, and 
then lift it up to remove. 

REATTACHING THE 
REFRIGERATOR DOORS

•  Be sure to re-attach the Freezer Door 

before re-attaching the Fridge Door.

•  Before re-attaching, make sure that all 

the wire connectors at the bottom of the 
Freezer Door are connected.

How to Re-attach the Freezer Door

 

1.  Insert the door into the lower hinge (A) in the 

direction of (1) and then push the door in the 
direction of (2). Take care not to scratch the 
door with the Mid-Hinge (B).  

•  Be careful not to damage the wires on 

the bottom of the door. Avoid stepping 
on them, etc.

 

2.  Insert the Hinge Shaft (C) into the Mid Hinge 

Hole (D) and put on the Hinge Cap (E).

When assembling the Hinge Shaft and the 
Hinge Cap, be sure to assemble them in 
the correct direction. 

 

3.  With the door open, join the connectors on the 

bottom of the door. 

 

-  Be careful not to step on or damage the 

connectors.

DA68-02836K (EN)-08.indd   18

2015. 8. 26.   �� 11:37