Samsung RF858VALASL Manuel D’Utilisation
22_
setting up
1. Connect the household water line to the
assembled compression fitting.
- If you are using copper tubing, slip the
compression nut (
B ) (not supplied) and
ferrule (not supplied) on the copper tubing (not
supplied) as shown.
supplied) as shown.
- If you are using plastic tubing (
B ), insert the
molded end (Bulb) of the plastic tubing (
B ) into
the compression fitting.
• Do not use without the molded end (Bulb)
of the plastic tubing (
B ).
2. Tighten the compression nut ( B ) onto the
compression fitting.
Do not over-tighten the compression nut (
Do not over-tighten the compression nut (
B ) .
3. Turn water on and check for any leakage. If you
find water drops or leakage in the connection
areas, turn off the main water supply. Check
the connections and, if necessary, tighten.
areas, turn off the main water supply. Check
the connections and, if necessary, tighten.
4. Flush 1 gallon of water through the filter before
drinking or using the water from the refrigerator.
(Flush approximately 6 minutes.) To flush, press
a large glass or cup against the water dispenser
lever. Fill the glass, empty it into the kitchen sink
after it is filled, and then repeat.
(Flush approximately 6 minutes.) To flush, press
a large glass or cup against the water dispenser
lever. Fill the glass, empty it into the kitchen sink
after it is filled, and then repeat.
5. After you turn on the refrigerator, let the ice
maker make ice for 1 to 2 days. Over that period
of time, throw out the first 1 or 2 buckets of ice
the freezer makes to ensure all impurities have
been removed from the water line.
of time, throw out the first 1 or 2 buckets of ice
the freezer makes to ensure all impurities have
been removed from the water line.
• Only connect the water line to a drinkable
water source.
If you have to repair or disassemble the water line,
CAUTION
cut off 1/4“ of the plastic tubing to make sure you
get a snug, leak-free connection.
get a snug, leak-free connection.
• You can test the water line quickly using
a paper cup. Under normal conditions,
the water dispenser can fill a 170 cc cup
in about 10 seconds.
the water dispenser can fill a 170 cc cup
in about 10 seconds.
Compression
Nut (1/4”)
(Assembled)
Ferrule
(Not supplied)
Plastic Tubing
(Assembled)
Compression
Fitting
(Assembled)
(Assembled)
Compression
Fitting
(Assembled)
Molded
end(Bulb)
end(Bulb)
Compression
nut (B) (1/4”)
(Not supplied)
nut (B) (1/4”)
(Not supplied)
or
Copper tubing
(Not supplied)
(Not supplied)
Plastic tubing (B)
(Not supplied)
(Not supplied)
Household water supply line
Refrigerator
DA68-02836K (EN)-08.indd 22
2015. 8. 26. �� 11:37