Samsung RF858VALASL Manuel D’Utilisation
operating
_25
02
OPERA
TING
• The locked symbol should be lined up
with the indicator line.
5. Touch the “Alarm/hold
3 sec for Filter Reset”
button (
button (
(Filter Reset)
) for about
3 seconds to reset the
water filter. The color of the
indicator (
water filter. The color of the
indicator (
) changes from red to off.
6. If you turned off the water supply, turn it back
on.
• For a replacement water filter, visit your
local home Improvement center, go to
SamsungParts.com on line, or contact
your authorized Samsung dealer.
Be sure the replacement water filter has
the SAMSUNG logo on the box and on
the water filter.
SamsungParts.com on line, or contact
your authorized Samsung dealer.
Be sure the replacement water filter has
the SAMSUNG logo on the box and on
the water filter.
Removing any residual matter inside the
water supply line after installing the water
filter.
water supply line after installing the water
filter.
1. Turn ON the main water
supply and supply water
from water supply line.
from water supply line.
2. Run water through the
dispenser until the water
runs clear (approx. 6 to 7
minutes). This will clean
the water supply system and remove air from
the lines.
runs clear (approx. 6 to 7
minutes). This will clean
the water supply system and remove air from
the lines.
3. Additional flushing may be required in some
households.
4. Open the Refrigerator door and make sure
there are no water leaks coming from the water
filter.
filter.
• Be sure to flush the dispenser thoroughly,
otherwise water may drip from the
dispenser.
This means that there is still air in the line.
dispenser.
This means that there is still air in the line.
Reverse Osmosis Water Supply
IMPORTANT:
IMPORTANT:
The pressure of the water supply coming out of a
reverse osmosis system going to the water inlet
valve of the refrigerator needs to be between 241
and 827 kPa.
If a reverse osmosis water filtration system is
connected to your cold water supply, the water
pressure to the reverse osmosis system needs
to be a minimum of 276 to 414 kPa. If the water
pressure to the reverse osmosis system is less
than 276 to 414 kPa:
reverse osmosis system going to the water inlet
valve of the refrigerator needs to be between 241
and 827 kPa.
If a reverse osmosis water filtration system is
connected to your cold water supply, the water
pressure to the reverse osmosis system needs
to be a minimum of 276 to 414 kPa. If the water
pressure to the reverse osmosis system is less
than 276 to 414 kPa:
• Check to see whether the sediment filter in the
reverse osmosis system is blocked. Replace
the filter if necessary.
the filter if necessary.
• Allow the storage tank on the reverse osmosis
system to refill after heavy usage.
• If your refrigerator has a water filter, it may
further reduce the water pressure when used
in conjunction with a reverse osmosis system.
Remove the water filter.
in conjunction with a reverse osmosis system.
Remove the water filter.
If you have questions about your water pressure,
call a licensed, qualified plumber.
call a licensed, qualified plumber.
CONTROLLING THE
TEMPERATURE
TEMPERATURE
RECOMMENDED FREEZER AND
REFRIGERATOR COMPARTMENT
TEMPERATURES
REFRIGERATOR COMPARTMENT
TEMPERATURES
The recommended temperatures for the Freezer
and Refrigerator Compartments are -19 °C
and 3 °C (-2 °F and 38 °F) respectively. If the
temperature of the Freezer and Refrigerator
Compartments are too high or low, adjust the
temperature manually.
and Refrigerator Compartments are -19 °C
and 3 °C (-2 °F and 38 °F) respectively. If the
temperature of the Freezer and Refrigerator
Compartments are too high or low, adjust the
temperature manually.
CONTROLLING THE FREEZER
TEMPERATURE
TEMPERATURE
4
Recommend Temp (Freezer) : -19 °C (-2 °F)
DA68-02836K (EN)-08.indd 25
2015. 8. 26. �� 11:37