Samsung HT-BD6200 Manuel D’Utilisation

●

Aspect ratio cannot be changed.

•  You can play 16:9 BD/DVDs in 16:9 Wide mode, 4:3 Letter Box mode, or 

4:3 Pan - Scan mode, but 4:3 BD/DVDs can be seen in 4:3 ratio only. 
Refer to the Blu-ray Disc jacket and then select the appropriate function.

•  The main unit is not working. 

(Example: The power goes out or a 
strange noise is heard.)

•  The Blu-ray Home Cinema is not working 

normally.

•  Turn off the power, and press and hold the 

STOP ( 

 ) 

button on the main 

unit for longer than 5 seconds.

-  Using the RESET function will erase all stored settings. 

Do not use this unless necessary.

The password for rating level has been 
forgotten.

•  While (NO DISC) message appears on the display of main unit, press and 

hold the main unit's 

STOP ( 

 )

 button for longer than 5 seconds. INITIAL 

appears on the display and all settings will return to the default values. And 
then press the POWER button.

-  Using the RESET function will erase all stored settings. 

Do not use this unless necessary.

Can't receive radio broadcasts.

•  Is the antenna connected properly?

•  If the antenna's input signal is weak, install an external FM antenna in an 

area with good reception.

While listening to TV audio through the 
Blu-ray Home Cinema, no sound is 
heard.

•  If  the  EJECT (

) button is pressed while listening to TV audio using the D.IN 

or AUX functions, the BD/DVD functions are turned on and this mutes the TV 
audio.

The   icon appears on screen.

•   The features or action cannot be completed at this time because:

1. The BD/DVD’s software restricts it.
2.  The BD/DVD’s software doesn’t support the feature (e.g., angles)

3. The feature is not available at the moment.
4.  You’ve requested a title or chapter number or search time that is out of range.

If the HDMI output is set to a resolution your 
TV cannot support (for example, 1080p), you 
may not see a picture on your TV.

•   Press the 

STOP ( 

 ) button

 (on the front panel) for more than 5 

seconds with no disc inside. All settings will revert to the factory settings.

No HDMI output.

•   Check the connection between the TV and the HDMI jack of the Blu-ray 

Home Cinema.

•   Check if your TV supports 576p/480p/720p/1080i/1080p HDMI input 

resolution.

Abnormal HDMI output screen.

•   If random noise appears on the screen, it means that TV does not support 

HDCP (High-bandwidth Digital Content Protection).

Cannot search for other access points 
using USB wireless. 

•   Check the Proxy is Off(Setup -> Network Setup -> Proxy)

HT-BD6200_ELS_0709-3.indd   85

HT-BD6200_ELS_0709-3.indd   85

2009-07-13     5:04:17

2009-07-13     5:04:17