Samsung LED Monitor Manuel D’Utilisation
Configuring the Basic Settings in Initial Setup
When you turn the product on for the first time, a sequence of screens and on-screen prompts will assist you in
configuring the product’s basic settings. Plug the power cord into a wall outlet, and then press the
configuring the product’s basic settings. Plug the power cord into a wall outlet, and then press the
P
button to turn on
the product.
✎
Setup
is available only when the
Source
is set to
TV
. See "Changing the Input Source" (page 30).
✎
To return to the previous step in the
Setup
sequence, select
Previous
.
✎
If you are not using a cable box or satellite box, make sure you have connected the product to an antenna or cable
connection before you turn on the product. See page 20 for instructions.
connection before you turn on the product. See page 20 for instructions.
✎
If you want to configure a wired network connection during Setup, make sure you've connected a LAN cable to
your product. See page 61 for instructions. If you want to configure a wireless network connection during Setup,
make sure your wireless modem or router is on and working. See page 62 for instructions.
your product. See page 61 for instructions. If you want to configure a wireless network connection during Setup,
make sure your wireless modem or router is on and working. See page 62 for instructions.
1
Menu Language
:
Select a Language.
After you press the
P
button, the Start screen appears. Select
Next
to continue.
The Menu Language screen appears. Select the menu language you want using
your remote, and then select
your remote, and then select
Start
. The product will display on-screen menus
using the language you select beginning with the next step in the
Setup
process.
2
Use Mode
: Select the
Home Use Mode.
On the
Use Mode
screen, select the
Home Use
mode using your remote, and then
select
Next
. The Network Settings screen appears.
✎
Store Demo
mode is for retail environments only. If you select
Store Demo
,
some functions will not work, and the product will reset all functions to their
factory default after a certain period of time. For more information about
factory default after a certain period of time. For more information about
Store Demo
, go to the end of this section.
3
Network Settings
:
Configure the network
settings
settings
✎
To configure
later, select
later, select
Skip
.
You can set up
the network
connection later
using the on-
screen
the network
connection later
using the on-
screen
Network
menu.
To configuring your network settings, select
Next
using your remote, and then go
to 3A - Wireless Network or 3B - Wired Network on the next page.
If you do not know your network configuration information or want to configure
the settings later, or do not have a network, select
the settings later, or do not have a network, select
Skip
, and then go to 6 -
Auto
Program
To configure network settings later, refer to the Network Connection sections in
this manual (pages 61 and 62).
this manual (pages 61 and 62).
Getting Started
English - 20
English - 21